Find a Course

Trainee

AIS Training are specialists in helping people to get into industry, even from trainee level. Check out our stage one and starter packages to find out more.

OPITO BOSIET with CA-EBS
AIS Aberdeen Skills Centre, Newcastle

OPITO Basic Offshore Safety Induction and Emergency Training (BOSIET) with CA-EBS provides an understanding and awareness of the hazards encountered when working on offshore installations.

This course includes the use of a Compressed Air Emergency Breathing System (CA-EBS), which is considered the North Sea BOSIET requirement.

View

IRATA Rope Access Level 1, 2 or 3
Dyce, Newcastle

IRATA Rope Access training courses provide the practical skills and knowledge required for anyone working in any type of rope access role.

AIS Training offer IRATA Rope Access in Levels 1, 2 or 3.

View

OPITO Banksman & Slinger Training Stage 1
Newcastle

A Banksman and Slinger is responsible for ensuring safety during crane and slinging operations.

OPITO Banksman and Slinger Training Stage 1 provides delegates with basic knowledge of the activities associated with the combined roles.

View

OPITO Rigger Training Stage 1
Newcastle

OPITO Rigger training courses are widely recognised as the industry standard training for offshore rigging and lifting operations.

OPITO Rigger Stage 1 is for those who have little or no training or experience.

View

CISRS COTS (CISRS Operative Training Scheme)
Dyce, Newcastle, On-site, South Wales

This 1 day CISRS COTS course introduces new scaffolders to the industry, and allows CISRS card holders to renew their card once it expires.

Delegates will learn the basics of scaffolding and understand how to work safely with scaffolding and access equipment.

View

ECITB MJI10: Hand Torque Bolted Connection Techniques
Dyce, Newcastle, On-site

ECITB Mechanical Joint Integrity MJI10: Hand Torque Bolted Connection Techniques concentrates on the skilled performance required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque.

This technically detailed course is delivered to the latest ECITB standards.

View

BINDT Dye Penetrant Inspection PCN Level 2
Newcastle

Dye Penetrant is a category of non-destructive testing (NDT) commonly used to locate surface-breaking defects in all non-porous materials using dye.

Delegates will work on test pieces and industrial components with emphasis on interpretation of defect indications.

View

IOSH Working Safely
Dyce, Newcastle, On-site

IOSH Working Safely is a one day course for personnel at any level, in any sector.

Delegates will gain an understanding of health and safety and how to make a real difference to the wellbeing of themselves and others through changing behaviour.

View

ECITB Mechanical Joint Integrity (MJI10, MJI18, MJI19)
Dyce, Newcastle

This ECITB Mechanical Joint Integrity course is a combination of MJI10, MJI18 & MJI19 which are stage one of the four stage ECITB MJI training standards validating skills in the specialist critial bolting area. 

These training standards cover isolations, dismantling techniques, inspection of components, alignment techniques and clamp connectors as well as assembly and tightening techniques in specialist critical bolting.

View

OPITO Application of Insulation Systems Training Level 1
Newcastle

Installing an effective insulation system can protect equipment and personnel, control noise emissions, reduce energy costs and increase process efficiencies. With an appropriate product, installed correctly in a professional and effective manner, Insulation Applicators can provide monetary gains which outstrip the initial costs, while contributing positively to health & safety.

View

OPITO H2S
Newcastle, On-site

H2S is one of the most deadly occupational hazards affecting operations in the oil and gas industries. The training covers relevant information and legislation and practical detection and measurement of the flammable gas, plus the correct emergency response to an H2S leak. 

View

ECITB CCNSG Safety Passport - Refresher
Dyce, Newcastle, On-site

The ECITB CCNSG Safety Passport Refresher training programme must be completed within 3 years of gaining a CCNSG Safety Passport Card to remain certified.

Delegates will refresh their understanding of all aspects of working safely.

View

ECITB Manual Handling
Newcastle

ECITB Manual Handling provides an understanding of the risks and practical issues involved in manual handling.

Delegates will learn to carry out manual handling tasks in a safe way.

View

IET 18th Edition Wiring Regulations: City and Guilds
Dyce, Newcastle

The City and Guilds 18th Edition IET Wiring Regulations training course familiarises electrical professionals with the changes to the BS 7671:2018 standard.

All electrical professionals must ensure they are familiar with the changes to the standard which came into force in January 2019.

View

Norwegian Escape Chute
Newcastle

A Norwegian Escape Chutes is an evacuation system which is in place on some offshore installations.

Delegates will gain an understanding of the Norwegian Escape Chute system and practice using it as a tertiary means of escape.

View

Working at Height - Unit 5 Portable Ladder Usage and Inspection
Newcastle

The aim of this half day course is to provide the necessary skills and knowledge to inspect, produce records and safely use portable ladders and step ladders.

View

Benzene Awareness
Dyce

This half day course is designed to give the candidate the basic knowledge, skills and attitudes to identify the risks involved in working with Benzene and a potentially hazardous environment.

View

GWO Basic Technical Training – Hydraulics
Newcastle

GWO Basic Technical Training (BTT) Hydraulics provides the knowledge and skills to carry out basic hydraulic tasks on a wind installation.

Delegates will learn to use safe working procedures and correct personal protective equipment (PPE).

View

GWO Basic Technical Training – Electrical
Newcastle

GWO Basic Technical Training (BTT) Electrical provides the knowledge and skills to carry out basic electrical tasks on a wind installation.

Delegates will learn to use working procedures and correct personal protective equipment.

View

ITC First Aid At Work Level 3 (QCF) Refresher
Dyce, Newcastle, On-site

The course aims to update and refresh your knowledge of the First Aid at Work syllabus, while allowing time for revision and practice sessions in preparation for a practical and written assessment.

View

CompEx Foundation
Newcastle

The CompEx Foundation course provides knowledge and understanding of the terminology and protection concepts used in a potentially flammable atmosphere.

For full participation, delegates are required to have no prior knowledge of flammable or potentially explosive atmospheres.

View

CISRS Part 1 Scaffolding Tube & Fitting
Newcastle, South Wales

The CISRS Part 1 Scaffolding Tube and Fitting training course reinforces the core skills of scaffolding, including how to safety erect, alter and dismantle strucutres.

Delegates will gain an improved knowledge of using tube and fitting or system scaffolding.

View

IPAF (Mobile Elevated Work Platform Training)
Newcastle

IPAF Mobile Elevated Work Platform (MEWP) training is beneficial in all workplace sectors.

Delegates will learn how to correctly operate common pieces of equipment that are used within the workplace in a wide variety of industries.

View

Advanced Hub Rescue (AHR)
Newcastle

Advanced Hub Rescue provides the specialist skills and knowledge to rescue personnel incapacitated in various sections of a turbine including the hub.

Delegates will learn to react in a safe, effective and prompt manner to stabilise a casualty.

View

Forklift Truck Training (ITSSAR)
Newcastle

This training programme has been designed for novices with little or no previous FLT driving experience (or for those with no formal FLT qualification). Please note that course durations will vary depending on how many are booked onto the course.

PLEASE NOTE: Unfortunately we cannot currently offer this course to self-funder delegates.

View

ECITB MJI18: Hydraulic Tension Bolted Connection Techniques
Dyce, Newcastle

ECITB Mechanical Joint Integrity MJI18: Hydraulic Tension Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening bolted connections using hydraulic tensioning equipment.

The technically detailed course is delivered to the latest ECITB standards.

View

ECITB MJI19: Hydraulic Torque Bolted Connection Techniques
Dyce, Newcastle

ECITB Mechanical Joint Integrity MJI19: Hydraulic Torque Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening flanged and clamp connector pipe joints using hydraulic torque equipment.

The technically detailed course is delivered to the latest ECITB standards.

View

OPITO Combined BOSIET
Newcastle

OPITO combined Basic Offshore Safety Induction and Emergency Training (BOSIET) training provides an understanding and awareness of the hazards encountered when working on offshore installations.

This course includes Compressed Air Emergency Breathing System (CA-EBS) and Emergency Breathing System (EBS), sometimes referred to as a rebreather. This is considered the international BOSIET requirement.

View

OPITO Combined FOET
Newcastle

OPITO combined FOET includes the OPITO Further Offshore Emergency Training (FOET) with Emergency Breathing System (EBS) and Compressed Air Emergency Breathing System (CA-EBS). This is considered the international FOET requirement.

Delegates will have the opportunity to practice and demonstrate emergency response skills which are not possible to practice during offshore drills, exercises and emergency training.

View

CISRS Basic Scaffold Inspection
Dyce, Newcastle, South Wales

CISRS Basic Scaffold Inspection is aimed at scaffolders responsible for inspecting and checking basic scaffolds.

Delegates will develop an understanding of scaffolding components, forms and construction and inspection procedures of basic access scaffolds.

View

OPITO Offshore Emergency Response Team Leader (OERTL)
Newcastle

OPITO Offshore Emergency Response Team Leader (OERTL) training is for current OERTLs or those who wish to progress into the role.

PLEASE NOTE: This course is delivered at Offshore Training Newcastle (OTN) at Newcastle International Airport Training Academy.

View

OPITO Combined Helideck / Offshore Emergency Response Team Member (HERTM/OERTM)
Newcastle

This combined OPITO course includes Helideck Emergency Response Team Member (HERTM) and Offshore Emergency Response Team Member (OERTM) training.

PLEASE NOTE: This course is delivered at Offshore Training Newcastle (OTN) at Newcastle International Airport Training Academy.

View

OPITO Compressed Air - EBS
Dyce, Newcastle, On-site

OPITO Compressed Air Emergency Breathing System (CA-EBS) Initial Deployment Training is now a mandatory requirement for offshore workers.

Delegates will learn the particular hazards and properties of a CA-EBS.

View

BINDT Magnetic Particle Inspection (MPI) PCN Level 2
Newcastle

Magnetic Particle Inspection (MPI), sometimes referred to as Magnetic Testing (MT), is a category of non-destructive testing (NDT) commonly used to locate subsurface defects in ferromagnetic materials.

Delegates will inspect welds, castings and forgings using magnetising NDT methods.

View

Advanced Confined Space & Entry
Newcastle

Advanced Confined Space and Entry provides knowledge of the safety practices and equipment utilised when working in confined spaces.

Delegates will learn to safely enter and work within higher risk confined space environments where breathing apparatus may be required.

View

Working at Height - Unit 2 PPE User
Dyce, Newcastle

The Working at Height - Unit 2 PPE User training course is an exciting programme for those who work above ground at any level.

View

ITC Emergency First Aid At Work Level 3 (QCF)
Dyce, Newcastle, On-site

The ITC Emergency First Aid at Work may be more suitable for lower-risk work environments, such as offices and/or organisations with fewer than 100 employees. Successfully completing the ITC Emergency First Aid at Work will enable the candidate to act as a first aider in the workplace.

View

BINDT Level 2 Plate Testing (UT Thickness & Laminations)
Newcastle

Ultrasonic Testing (UT) is a category of non-destructive testing which uses sound currents to inspect inside a material.

This British Institute of Non-Destructive Testing (BINDT) PCN Level 2 course includes ultrasonic testing of lamination and thickness of steel plates.

View

Working at Height - Unit 1 Height Safety and Harness Awareness
Dyce, Newcastle, On-site

The Working at Height  - Unit 1 Height Safety and Harness Awareness training course is designed to introduce candidates who are not actively involved in working at height to the requirements of regulations.

View

Working at Height - Unit 3 Use of Rescue Equipment
Dyce, Newcastle

The Working at Height  - Unit 3 Use of Rescue Equipment training course is an exciting programme for those whose role involves performing rescues at height.

View

ECITB Low Risk Confined Space
Newcastle

The ECITB Low Risk Confined Space course covers low risk shallow entries no deeper than three metres.

Delegates will learn to use equipment which allows safe access and egress into confined space environments.

View

ITC Level 2 Award in Basic Life Support and Safe Use of an Automated External Defibrillator
Dyce, Newcastle

This qualification is designed to provide essential lifesaving skills. This training programme has been developed following the current Resuscitation Council (UK) guidelines. 

View

Abrasive Wheels Training
Dyce, Newcastle

Designed to provide delegates with an understanding of safe working practises when using abrasive wheels.

View

Manual Handling
Dyce, Newcastle

Providing delegates with a good understanding of the risks and practical issues involved with manual handling.

View

Asbestos Awareness
Dyce, Newcastle, On-site

Personnel who may come across asbestos or asbestos-containing materials must be appropriately trained to work safely and avoid disturbing or damaging the hazardous substance.

This Asbestos Awareness course provides an introduction to the potential damage to health which can be caused by coming into contact with asbestos.

View

Boat Transfer
Newcastle, On-site

This popular Boat Transfer training provides delegates with theoretical knowledge and practical experience of transferring between vessels offshore.

The course focuses on safe transfer between a turbine transfer vessel and a wind turbine.

View

Forklift Truck Training (RTITB)
Dyce, Newcastle, On-site

This training programme has been designed for novices with little or no previous FLT driving experience (or for those with no formal FLT qualification). Please note that course durations will vary depending on how many are booked onto the course.

PLEASE NOTE: Unfortunately we cannot currently offer this course to self-funder delegates.

View

OPITO Offshore Emergency Response Team Member (OERTM)
Newcastle

OPITO Offshore Emergency Response Team Member (OERTM) training prepares offshore emergency response teams to react safely and effectively in the unfortunate event of an offshore emergeny situation.

PLEASE NOTE: This course is delivered at Offshore Training Newcastle (OTN) at Newcastle International Airport Training Academy.

View

Offshore Oil & Gas Medical
Newcastle

Oil & Gas UK (OGUK) set a standard of fitness for those working offshore in the UK.

Every offshore worker must pass an OGUK offshore medical examination which classifies them as medically fit to work in the offshore environment. 

View

OPITO Blaster Sprayer Training Level 1
Newcastle

OPITO Blaster Sprayer training courses are widely recognised as the industry standard training for offshore blaster/sprayer operations.

OPITO Blaster Sprayer Level 1 can act as an introduction to newcomers or a useful refresher for experienced blaster/sprayers to test their knowledge.

View

Overhead Crane
Newcastle, On-site

Overhead Crane training provides an understanding of the relevant legislation that applies to lifting operations and lifting equipment and accessories.

Delegates will learn to safely and effectively operate overhead cranes.

View

Risk Assessment Training
Dyce, Newcastle, On-site

AIS Training have developed risk assessment training that provides delegates with an understanding of producing lifting plans and risk assessments.

View