Find a Course

TICA-P 01 Abrasive Blast Cleaning (Direct Pressure) is a Sprayer Blaster Painter ECITB Technical Test.

Delegates working on both onshore and offshore fabric maintenance can complete this as a "trade test" before their employment is started or approved.

• Quick Book

TICA-A02 Industrial Coatings Brush Application is a Sprayer Blaster Painter ECITB Technical Test.

Delegates working on both onshore and offshore fabric maintenance can complete this as a "trade test" before their employment is started or approved.

• Quick Book

TICA-A01 Industrial Coatings Airless Spray Application is a Sprayer Blaster Painter ECITB Technical Test.

Delegates working on both onshore and offshore fabric maintenance can complete this as a "trade test" before their employment is started or approved.

• Quick Book

ECITB Technical Test - TTI01 Thermal Insulation is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Fabric Maintenance who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TWAHR01 – Working at Height Basic Rescue Techniques is an ECITB Technical Test.

This test is aimed at both onshore and offshore personnel who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TWAH01 – Working at Height is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TML03 Moving Loads - Interpret and carry out a lift plan with obstructions is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in lifting operations who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

Technical Tests are the most flexible, economical and ‘instant’ way to assess and validate the ability of individual employees or prospective recruits to perform the skill-based tasks that the industry needs. A Technical Test ensures a Craftsperson or Technician has the skill, ability and job knowledge relevant to the work they are required to carry out. Each Technical Test examines a very specific aspect of an engineering construction discipline.

• Quick Book

The objective of this technical test is to ensure that a candidate has the knowledge, skills and ability to safely and accurately inspect, test and maintain industrial circuit protective equipment using appropriate materials, equipment, tools and techniques.

For: Transient Workers – Electrical Maintenance

• Quick Book

The objective of this technical test is to ensure that a candidate has the knowledge, skills and ability to safely and accurately carry out a visual, close, and detailed inspection of electrical and instrumentation equipment in a defined hazardous area, recording results, and recommending appropriate remedial action using appropriate materials, equipment, tools and techniques.

For: Transient Workers – Electrical Maintenance

• Quick Book

The objective of this technical test is to ensure that a candidate has the knowledge, skills and ability to safely and accurately check the condition of battery cells, take voltage readings making comparison to the manufacturers recommendations and check the functionality of battery-supported UPS (Uninterrupted power supply) equipment using appropriate materials, equipment, tools and techniques.

For: Transient Workers – Electrical Maintenance

• Quick Book

TIE04 Install Electrical Distribution Final Circuits is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Electrical Installation who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TIE08 Installing AC Electrical Motors is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Electrical Installation who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TIE15 Installing Support Systems is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Electrical Installation who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TIE16 Installing Cables in an Intrinsically Safe System is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Electrical Installation who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TIE 17 Install, Gland and Terminate Power Cables is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Electrical Installation who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

ECITB Technical Test – TPF05 Hot Work Preparation of Welded Pipework is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in pipefitting who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

ECITB Technical Test – TPF08 Fabricating and Installing Pipework Supports is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in pipefitting who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

ECITB Technical Test - TPF10 Hydrostatic Pressure Testing of Pipework Systems is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in pipefitting who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TPF11 Interpret Drawing Information and Assemble Threaded Pipework is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in pipefitting who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TPL01 - Marking Out Plate and Structural Steelwork from Drawings is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Plating who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TPL03 - Setting out Platework and Rolled Steel Section From Drawings is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Plating who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TPL08 Hot Work Fabrication and Inspection of Steelwork is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Plating who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TSCF02 Basic Scaffolder is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in scaffolding who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

TSCF03 Advanced Scaffolder is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in scaffolding who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

 TEM14 Periodic inspection of a 3-phase system is a ECITB Technical Test.

This test is aimed at both onshore and offshore personnel involved in Electrical Maintenance who may be required to complete a "trade test" before their employment is started or approved.

• Quick Book

ECITB Technical Mechanical Joint Integrity (TMJI) training is stage 3 in the ECITB/Step Change in Safety MJI model. 

The training is for delegates who have completed the corresponding stage 1 modules (MJI10, MJI18 or MJI19) and stage 2 (workplace practice) and need to update their knowledge before taking stage 4 (ECITB Technical Tests).

• Quick Book