Find a Course

Course tailored to level & experience

AIS Training deliver a range of bespoke and tailored training course that can be delivered from one of our 4 training villages or onsite at your place of work.

ECITB MJI10: Hand Torque Bolted Connection Techniques
Dyce, Grimsby, Newcastle, On-site

ECITB Mechanical Joint Integrity MJI10: Hand Torque Bolted Connection Techniques concentrates on the skilled performance required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque.

This technically detailed course is delivered to the latest ECITB standards.

View

OPITO H2S
Grimsby, Newcastle, On-site

H2S is one of the most deadly occupational hazards affecting operations in the oil and gas industries. The training covers relevant information and legislation and practical detection and measurement of the flammable gas, plus the correct emergency response to an H2S leak. 

View

Electricity at Work Regulations 1989
Dyce

This half-day course addresses the interpretation and application of the Electricity at Work Regulations 1989. It is intended for those who work directly with electricity, this course would also be appropriate for those who have responsibility for the health and safety of their employees, such as Project Managers or lead Supervisors. Please note this course is delivered at our sister company Survivex's training location. 

View

GWO Basic Technical Training – Hydraulics
Newcastle

The Basic Technical Training modules are targeted at candidates who have no previous experience of Hydraulic systems. This BTT Training shall enable Delegates to be able to perform basic Hydraulic tasks under the supervision of an experienced technician.

View

GWO Basic Technical Training – Electrical
Newcastle

The Basic Technical Training modules are targeted at candidates who have no previous experience of electrical systems. This BTT Training shall enable Delegates to be able to perform basic electrical tasks under the supervision of an experienced technician.

View

GOTCHA Rescue
Grimsby, Newcastle, On-site

GOTCHA Rescue training has been developed in conjuction with GOTCHA rescue equipment.

Delegates will learn a safe, effective and reliable method of performing a rescue of a colleague who has fallen, for example, on their fall arrest lanyards from a platform.

View

CMI Level 3 Certificate in Leadership and Management
Newcastle

Management and leadership skills are key to the success of an organisation. Good managers can transform business results through ensuring employees are engaged and motivated whilst reaching their potential. The transition from employee to manager is considered to be the most challenging of any management career and this course focuses on developing core, foundation skills which enable aspiring, new and those already in role to take this step confidently and successfully.

View

CMI Level 5 Diploma in Leadership and Management
Newcastle

Management and leadership skills are key to the success of an organisation. Good managers can transform business results through ensuring employees are engaged and motivated whilst reaching their potential. Managers are often promoted and ‘learn on the job’ and miss the opportunity to learn management skills. This course is designed for managers who have been in post for a period of time, normally at middle management level, and want to formalise their experience and enhance their practice. 

View

CMI Level 3 Certificate in Leadership and Management
Grimsby

Management and leadership skills are key to the success of an organisation. Good managers can transform business results through ensuring employees are engaged and motivated whilst reaching their potential. The transition from employee to manager is considered to be the most challenging of any management career and this course focuses on developing core, foundation skills which enable aspiring, new and those already in role to take this step confidently and successfully.

View

CMI Level 5 Diploma in Leadership and Management
Grimsby

Management and leadership skills are key to the success of an organisation. Good managers can transform business results through ensuring employees are engaged and motivated whilst reaching their potential. Managers are often promoted and ‘learn on the job’ and miss the opportunity to learn management skills. This course is designed for managers who have been in post for a period of time, normally at middle management level, and want to formalise their experience and enhance their practice. 

View

Electricity at Work Regulations 1989
Newcastle

This half-day course addresses the interpretation and application of the Electricity at Work Regulations 1989. It is intended for those who work directly with electricity, this course would also be appropriate for those who have responsibility for the health and safety of their employees, such as Project Managers or lead Supervisors. 

View

ECITB MJI18: Hydraulic Tension Bolted Connection Techniques
Dyce, Grimsby, Newcastle

ECITB Mechanical Joint Integrity MJI18: Hydraulic Tension Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening bolted connections using hydraulic tensioning equipment.

The technically detailed course is delivered to the latest ECITB standards.

View

ECITB MJI19: Hydraulic Torque Bolted Connection Techniques
Dyce, Grimsby, Newcastle

ECITB Mechanical Joint Integrity MJI19: Hydraulic Torque Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening flanged and clamp connector pipe joints using hydraulic torque equipment.

The technically detailed course is delivered to the latest ECITB standards.

View

CISRS Basic Scaffold Inspection
Newcastle

CISRS Basic Scaffold Inspection is aimed at scaffolders responsible for inspecting and checking basic scaffolds.

Delegates will develop an understanding of scaffolding components, forms and construction and inspection procedures of basic access scaffolds.

View

AIS Advanced Confined Space & Entry
Dyce, Grimsby, Newcastle

For delegates to apply an advanced level of safe working practices in higher risk confined space environments including an introduction to the use of full Breathing Apparatus sets.

View

Working at Height - Unit 2 PPE User
Aberdeen, Dyce, Grimsby, Newcastle

The Working at Height - Unit 2 PPE User course is an exciting programme for those involved in advanced measures of working at height.

Delegates will gain practical skills of instructing within a variety of advanced working at height environments.

View

ITC Emergency First Aid At Work Level 3 (QCF)
Dyce, Grimsby, Newcastle, On-site

The ITC Emergency First Aid at Work may be more suitable for lower-risk work environments, such as offices and/or organisations with fewer than 100 employees. Successfully completing the ITC Emergency First Aid at Work will enable the candidate to act as a first aider in the workplace.

View

Underwater Welding
Newcastle

AIS Training delivers world-class courses to leading industry standards which are accepted worldwide. These are delivered by a commercial diver welder in very small groups giving close, bespoke tuition. We deliver our courses on a customised basis working towards the skills you and your team need. This can cover simple re-qualification’s or re-familiarisation up to advanced underwater welding, codings or cutting courses.

View

AIS Abrasive Wheels
Grimsby

Designed to provide delegates with an understanding of safe working practises when using abrasive wheels.

View

Advanced Offshore First Aid Techniques
Dyce, Grimsby, Newcastle, On-site

This course is designed to upgrade the knowledge of the Offshore First Aider to a level of understanding and skills required to assist the Offshore Medic.

This course is a great add on for those who have completed (or are going to complete) the HSE 4-day Offshore First Aid course.

View

IRATA Rope Access Level 1, 2 & 3
Dyce, Grimsby, Newcastle

IRATA Rope Access courses provide the practical skills and knowledge required for anyone working in any type of rope access role.

AIS Training offer IRATA Rope Access in Levels 1, 2 or 3.

View

Abrasive Wheels Training
Dyce, Newcastle

Designed to provide delegates with an understanding of safe working practises when using abrasive wheels.

View

AIS Asbestos Awareness
AIS Aberdeen Skills Centre, Dyce, Grimsby, Newcastle, On-site

Asbestos awareness course will inform trainees of the legislation linked to Asbestos

View

Boat Transfer
Newcastle, On-site

This popular course delivers both theoretical and practical safe transfer between Turbine Transfer Vessel and Wind Turbine and again back to Turbine Transfer Vessel.

View

ECITB CCNSG Safety Passport
Dyce, Grimsby, Newcastle, On-site

The ECITB CCNSG Safety Passport training programme is a common prerequisite for anyone working on construction sites.

Delegates will gain an understanding of all aspects of working safely.

View

IOSH Managing Safely
Dyce, Grimsby, Newcastle, On-site

IOSH Managing safely is designed to give managers all they need to know to help them effectively manage health and safety in their workplace. It covers key health and safety issues, and includes a section on environment protection. 

View

AIS Banksman Slinger Training
Grimsby, Newcastle

A Banksman Slinger has a role of responsibility for ensuring the safety during crane and slinging operations. Banksman Slinger training will allow you to take on the role and guarentee the safety of all lifting crew members.

View