Find a Course

Oil & Gas

AIS Training are specialists in delivering world class training for the Oil and Gas Industry. AIS deliver training for onshore and offshore oil and gas job roles.

CISRS COTS (CISRS Operative Training Scheme)
Newcastle, On-site

This 1 day CISRS COTS course introduces new scaffolders to the industry, and allows CISRS card holders to renew their card once it expires.

Delegates will learn the basics of scaffolding and understand how to work safely with scaffolding and access equipment.

View

AIS Confined Space & Rescue
Grimsby

This confined space and rescue course is designed for delegates that operate in a low or medium risk confined space environment. 

View

ECITB MJI10: Hand Torque Bolted Connection Techniques
Dyce, Grimsby, Newcastle, On-site

ECITB Mechanical Joint Integrity MJI10: Hand Torque Bolted Connection Techniques concentrates on the skilled performance required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque.

This technically detailed course is delivered to the latest ECITB standards.

View

Dye Penetrant PCN Level 2
Newcastle

This course provides theory and practical work on test pieces and industrial components, with emphasis on interpretation of defect indications, also comparing sensitivity of the visible and fluorescent methods. Using fixed work stations or portable equipment as required. Dye Penetrant Inspection is a widely applied and method used to locate surface-breaking defects in all non-porous materials (i.e. metals, plastics, or ceramics) using dye. Candidates will gain an enhanced understanding of PT that will enable them to implement this NDT method competently.   

View

Offshore S-Cape Training
Grimsby, Newcastle, On-site

S-Cape is an evacuation system which is in place on some offshore installations.

Delegates will be provided with the skills and knowledge to use the S-Cape system.

View

IOSH Working Safely
Dyce, Grimsby, Newcastle, On-site

Working safely is a one-day course for people at any level, in any sector, needing a grounding of health and safety. It focuses on why health and safety is important, and how you can make a real difference to the wellbeing of yourself and others through changing your behaviour.

View

ECITB Mechanical Joint Integrity (MJI10, MJI18, MJI19)
Dyce, Grimsby, Newcastle

ECITB Mechanical Joint Integrity MJI10: Hand Torque Bolted Connection Techniques concentrates on the skilled performance required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque.

ECITB Mechanical Joint Integrity MJI18: Hydraulic Tension Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening bolted connections using hydraulic tensioning equipment.

ECITB Mechanical Joint Integrity MJI19: Hydraulic Torque Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening flanged and clamp connector pipe joints using hydraulic torque equipment.

View

OPITO Application of Insulation Training Level 1
Newcastle

Installing an effective insulation system can protect equipment and personnel, control noise emissions, reduce energy costs and increase process efficiencies. With an appropriate product, installed correctly in a professional and effective manner, Insulation Applicators can provide monetary gains which outstrip the initial costs, while contributing positively to health & safety.

View

AIS HAVS Awareness
Newcastle

The purpose of this course is to provide delegates on the awareness of HAVS, to identify the given vibrations from a variety of hand power tools.

View

COSHH Assessor Training
Dyce, Grimsby, Newcastle

This course will enable anyone responsible for the management and conducting of COSHH assessments in the workplace to recognise the requirement for a COSHH assessment, and for them to carry out these assessments methodically and in conjunction with current legislation.

View

CISRS Advanced Scaffold Inspection
Newcastle

CISRS Advanced Scaffold Inspection is aimed at Proffesional Scaffold Inspectors, Supervisors, Managers and anyone responsible for the inspection of complex tube and fitting scaffolds.

The course covers both basic and more complex scaffolding structures.

View

Onshore Emergency Responder
Dyce

Onshore Emergency Responder training is accredited by the Nautical Institute on behalf of the Department for Business, Energy and Industrial Strategy (BEIS).

Instructors with decades of operational experience will provide delegates with a wide breadth of knowledge in responding to offshore emergencies while onshore. 

PLEASE NOTE: This training is delivered at our sister company Survivex's location. 

View

ITC Emergency First Aid at Work Incl Electric Shock
Dyce, Grimsby, Newcastle

The ITC Emergency First Aid at Work with electric shock is suitable for those requiring a first aid certificate with emphasis on the requirements for those working around electricity. Successfully completing the ITC Emergency First Aid at Work will enable the candidate to act as a first aider in the workplace.

All AIS first aid courses are tailored to suit your particular needs and include all training materials, workbooks, examinations and certificates.

While the content of courses is obviously about as serious as anything could be, we have developed training methods designed to make taking a AIS first aid course an enjoyable experience as well as a valuable one.

View

Standalone Fit to Train Medical
Newcastle

Fit To Train relates to the risk of using Compressed Air Emergency Breathing Systems (CA-EBS) and is designed to ensure you are physically fit to use these systems.

If you wish to complete a BOSIET, FOET or HUET, you must have a Fit To Train certificate.

View

AIS PUWER Assessor
Grimsby, Newcastle, On-site

To give delegates a general outline on how the PUWER regulations work and how to carry out an assessment.

View

Careers Masterclass
Newcastle

Our free CV and Careers Masterclass will take place from 4.30pm - 5.30pm after courses have finished at our HQ in Newcastle on selected dates. This course will cover CV writing and design, cover letter writing, job search tips and tricks and also an overview of interview questions to look out for. 

You can select an available date or call the team on 0844 800 1810 (Opt1) to book a place on the next available course.

View

Manual Handling Assessor
Dyce

To give managers, supervisors, and all personnel involved in manual handling risk assessment the necessary skills to successfully assess and complete such assessments. The classroom based training can be completed using generic or company specific assessment documentation and systems, and covers all areas of manual handling risk assessment. Please note this course is delivered at our sister company Survivex's training location. 

View

Electricity at Work Regulations 1989
Dyce

This half-day course addresses the interpretation and application of the Electricity at Work Regulations 1989. It is intended for those who work directly with electricity, this course would also be appropriate for those who have responsibility for the health and safety of their employees, such as Project Managers or lead Supervisors. Please note this course is delivered at our sister company Survivex's training location. 

View

Safe Isolation and Reinstatement of Plant Awareness (SIRP Awareness)
Dyce

This course is designed to train delegates in the theory and practice of the Isolation Standard – Safe Isolation and Reinstatement of Plant (SIRP). Please note this course is delivered at our sister company Survivex's training location. 

View

OPITO Offshore Installation Manager (OIM) Controlling Emergencies (OIM Assessment)
Dyce

The OPITO Offshore Installation Manager (OIM) Controlling Emergencies Assessment assesses competency against the OPITO OIM controlling emergencies standard.

Delegates will be assessed on their ability to respond to a minumum of 3 scenarios.

PLEASE NOTE: This training is delivered at our sister company Survivex's location.

View

OPITO Major Emergency Management Initial Response (MEMIR) Training
Dyce

OPITO Major Emergency Management Initial Response (MEMIR) has been developed focusing on current major emergency management practices and techniques for dealing with offshore emergencies.

The course can be based and designed around clients' needs.

PLEASE NOTE: This training is delivered at our sister company Survivex's location. 

View

CompEx Electrical Resit - Theory
Newcastle

The CompEx Electrical Resit - Theory allows those who have failed the theory element of the CompEx Electrical course to resit it.

View

CompEx Electrical Resit - Practical
Newcastle

The CompEx Electrical Resit - Practical allows those who have failed practical modules 1, 2, 3 or 4 of the CompEx Electrical course to resit them.

View

Norwegian Escape Chute
Newcastle

A Norwegian Escape Chutes is an evacuation system which is in place on some offshore installations.

Delegates will gain an understanding of the Norwegian Escape Chute system and practice using it as a tertiary means of escape.

View

Coded Welding Course
Newcastle

AIS Training offer coded welding training in fully equipped state-of-the-art welding bays.

We also offer a range of coded welding testing standards, and as the ONLY training provider in the UK with a resident accredited engineer/surveyor here on-site, we allow you to take your welding test whenever you are ready, without needing to pre-book a test time or day.

View

Basic Welding Course
Newcastle

This Welding training is for those who need to learn welding but do not require any Coding certificate.

We are the only training provider in the UK with a resident accredited engineer/surveyor here on site.

View

ITC Level 3 Award in Assessing Competence in The Work Environment
Grimsby, Newcastle, On-site

The objective of the Level 3 Assess Workplace Skills, Knowledge and Understanding training is that delegates will be able to assess in the work place to NVQ standards (also would include OPITO and in house Standards).

View

ITC Level 3 Award in Understanding the Principles and Practices of Assessment (QCF)
Aberdeen, Grimsby, Newcastle, On-site

This course is for those who wish to gain an understanding of the principles and practices of assessment, without any requirements to practice as an assessor.

View

ITC Level 4 Award in The Internal Quality Assurance and Assessment Processes and Practices
Grimsby, Newcastle, On-site

This qualification is aimed at those who maintain the quality of assessment and monitor the candidate journey as part of their role at an assessment centre or other organisation.

View

ITC Level 4 Award in Understanding Internal Quality Assurance of Assessment Process and Practice
Aberdeen, Grimsby, Newcastle, On-site

This qualification is aimed at those wishing to gain an insight and further their knowledge in the field of Internal Quality Assurance without the necessity to practice.

View

ECITB TMJI - 10-11-18-19-20 Combined
Dyce, Newcastle

ECITB Technical Mechanical Joint Integrity (TMJI) training is stage 3 in the ECITB/Step Change in Safety MJI model. This course includes all five modules.

The training is for delegates who have completed all stage 1 modules (MJI10, MJI18 and MJI19) and stage 2 (workplace practice) and need to update their knowledge before taking stage 4 (ECITB Technical Tests).

View

Eddy Current - Combined Level 1 & 2
Dyce, Newcastle

Eddy Current is a non-destructive testing technique which is used for the inspection of conductive materials.

This combined Level 1 and 2 course provides detailed information on using the Eddy Current testing method with the latest equipment.

View

ECITB Technical SBT Tests
Dyce, Grimsby, Newcastle, On-site

ECITB Technical SBT Tests with an associated ECITB certificate of acheivement play a key role in validating candidate skills.

View

Manual Handling Assessor
Newcastle

To give managers, supervisors, and all personnel involved in manual handling risk assessment the necessary skills to successfully assess and complete such assessments. The classroom based training can be completed using generic or company specific assessment documentation and systems, and covers all areas of manual handling risk assessment.

View

Confined Space – Emergency Rescue and Recovery
Grimsby

This training course covers how to operate safely as a member of a rescue team who may need to rescue and recover a casualty from a confined space

View

Benzene Awareness
Dyce

This half day course is designed to give the candidate the basic knowledge, skills and attitudes to identify the risks involved in working with Benzene and a potentially hazardous environment.

View

ECITB Role of an Effective Supervisor
Newcastle

ECITB Role of an Effective Supervisor is part of the supervisor training programmes which have been developed by ECITB.

Delegates will learn the role and responsibilities of an effective supervisor.

View

IOSH Managing Safely in the Engineering Construction Industry
Newcastle

Understand the importance of managing health and safety at work

View

ECITB Becoming an Effective Communicator
Newcastle

ECITB Becoming an Effective Communicator is part of the supervisor training programmes which have been developed by ECITB.

Delegates will learn key communication and management skills required in a supervisory role.

View

ECITB Technical Mechanical Joint Integrity (TMJI)
Dyce, Grimsby, Newcastle, On-site

ECITB Technical Mechanical Joint Integrity (TMJI) training is stage 3 in the ECITB/Step Change in Safety MJI model. This course allows you to book individual modules.

The training is for delegates who have completed the corresponding stage 1 modules (MJI10, MJI18 or MJI19) and stage 2 (workplace practice) and need to update their knowledge before taking stage 4 (ECITB Technical Tests).

View

GOTCHA Rescue
Grimsby, Newcastle, On-site

GOTCHA Rescue training has been developed in conjuction with GOTCHA rescue equipment.

Delegates will learn a safe, effective and reliable method of performing a rescue of a colleague who has fallen, for example, on their fall arrest lanyards from a platform.

View

AIS Rigging and Lifting
Grimsby, Newcastle, On-site

AIS are offering this Introductory Rigger training course. To ensure these operations can be carried out safely, it is vital that operatives of lifting equipment and accessories for lifting are aware of the safe and correct use of equipment and the probable consequences if safe and best practice is not followed.

View

Fire Warden Training
Dyce, Grimsby, Newcastle, On-site

This course is to enable staff with an enhanced saftey roles to meet the the training requirmenets detailed in the Department for Communites and Local Government guidance and current workplace fire safety legislation.

View

AIS LOLER Awareness
Grimsby

LOLER is the prime source of information and guidance with respect to legislation concerning onshore and offshore lifting operations and lifting equipment.

This course is an excellent introduction to safe lifting awareness and can be tailored to your specific organisation or industry sector requirements. It also assists companies whose Safety Management System (SMS) requires lifting operations to be safely managed.

View

CompEx Foundation
Newcastle

The CompEx Foundation course provides knowledge and understanding of the terminology and protection concepts used in a potentially flammable atmosphere.

For full participation, delegates are required to have no prior knowledge of flammable or potentially explosive atmospheres.

View

OPITO Oil & Gas Industry Fireproofing Competence Assessment (Level 2)
Newcastle, On-site

The OPITO Approved Fireproofing Competence Assessment specifies the assessment process and criteria to demonstrate competence in the role of an industrial fireproofer. Successful candidates will be awarded with an OPITO Approved certificate of competence which can be used by employing companies to assess their experience in passive fireproofing installation.

View

OPITO Application of Insulation Systems Competence Assessment (Level 2)
Newcastle, On-site

The OPITO Approved Application of Insulation Systems Competence Assessment Level 2 Standard specifies the assessment process and criteria for the candidate to demonstrate competence in the role an insulation practitioner. Successful candidates will be awarded an OPITO certificate of competence.

View

CMI Level 3 Certificate in Leadership and Management
Newcastle

Management and leadership skills are key to the success of an organisation. Good managers can transform business results through ensuring employees are engaged and motivated whilst reaching their potential. The transition from employee to manager is considered to be the most challenging of any management career and this course focuses on developing core, foundation skills which enable aspiring, new and those already in role to take this step confidently and successfully.

View

CMI Level 5 Diploma in Leadership and Management
Newcastle

Management and leadership skills are key to the success of an organisation. Good managers can transform business results through ensuring employees are engaged and motivated whilst reaching their potential. Managers are often promoted and ‘learn on the job’ and miss the opportunity to learn management skills. This course is designed for managers who have been in post for a period of time, normally at middle management level, and want to formalise their experience and enhance their practice. 

View

CMI Level 7 Diploma in Leadership and Management
Newcastle

Management and leadership skills are key to the success of an organisation. Senior leaders are critical to the success of the organisation through the culture they create and the expectation they set of others. They require exceptional communication skills and the ability to drive performance through their management team, empowering others whilst maintaining high levels of accountability.

View

CMI Level 3 Certificate in Leadership and Management
Grimsby

Management and leadership skills are key to the success of an organisation. Good managers can transform business results through ensuring employees are engaged and motivated whilst reaching their potential. The transition from employee to manager is considered to be the most challenging of any management career and this course focuses on developing core, foundation skills which enable aspiring, new and those already in role to take this step confidently and successfully.

View

CMI Level 5 Diploma in Leadership and Management
Grimsby

Management and leadership skills are key to the success of an organisation. Good managers can transform business results through ensuring employees are engaged and motivated whilst reaching their potential. Managers are often promoted and ‘learn on the job’ and miss the opportunity to learn management skills. This course is designed for managers who have been in post for a period of time, normally at middle management level, and want to formalise their experience and enhance their practice. 

View

CMI Level 7 Diploma in Leadership and Management
Grimsby

Management and leadership skills are key to the success of an organisation. Senior leaders are critical to the success of the organisation through the culture they create and the expectation they set of others. They require exceptional communication skills and the ability to drive performance through their management team, empowering others whilst maintaining high levels of accountability.

View

CISRS Part 1 Scaffolding Tube & Fitting
Newcastle

The CISRS Part 1 Scaffolding Tube & Fitting training course reinforces the core skills of scaffolding, including how to safety erect, alter and dismantle strucutres.

Delegates will gain an improved knowledge of using tube and fitting or system scaffolding.

View

IPAF (Mobile Elevated Work Platform Training)
Newcastle, On-site

IPAF Mobile Elevated Work Platform (MEWP) training is beneficial in all workplace sectors.

Delegates will learn how to correctly operate common pieces of equipment that are used within the workplace in a wide variety of industries.

View

AIS Overhead Crane
On-site

AIS Overhead Crane training enables delegates to safely and effectively operate overhead cranes.

This course also provides an understanding of the relevant legislation that applies to lifting operations and lifting equipment and accessories.

View

AIS LOLER Awareness
On-site

LOLER is the prime source of information and guidance with respect to legislation concerning onshore and offshore lifting operations and lifting equipment.

This course is an excellent introduction to safe lifting awareness and can be tailored to your specific organisation or industry sector requirements. It also assists companies whose Safety Management System (SMS) requires lifting operations to be safely managed.

View

Electricity at Work Regulations 1989
Newcastle

This half-day course addresses the interpretation and application of the Electricity at Work Regulations 1989. It is intended for those who work directly with electricity, this course would also be appropriate for those who have responsibility for the health and safety of their employees, such as Project Managers or lead Supervisors. 

View

Working at Height - Unit 4 Managers and Supervisors
Dyce, Grimsby, Newcastle, On-site

Working at Height - Unit 4 Managers and Supervisors demonstrates a selection of working at height techniques.

Delegates will gain a comprehensive understanding of site managers and supervisors responsibilities under the Health and Safety at Work Act 1974 and its supporting regulations.

View

ECITB MJI18: Hydraulic Tension Bolted Connection Techniques
Dyce, Grimsby, Newcastle

ECITB Mechanical Joint Integrity MJI18: Hydraulic Tension Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening bolted connections using hydraulic tensioning equipment.

The technically detailed course is delivered to the latest ECITB standards.

View

ECITB MJI19: Hydraulic Torque Bolted Connection Techniques
Dyce, Grimsby, Newcastle

ECITB Mechanical Joint Integrity MJI19: Hydraulic Torque Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening flanged and clamp connector pipe joints using hydraulic torque equipment.

The technically detailed course is delivered to the latest ECITB standards.

View

ECITB Mechanical Joint Integrity (MJI10 & MJI19)
Dyce, Grimsby, Newcastle, On-site

ECITB Mechanical Joint Integrity MJI10: Hand Torque Bolted Connection Techniques concentrates on the skilled performance required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque.

ECITB MJI19: Hydraulic Torque Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening flanged and clamp connector pipe joints using hydraulic torque equipment.

View

OPITO Combined BOSIET
Newcastle

OPITO Basic Offshore Safety Induction and Emergency Training (BOSIET) provides a basic level of understanding and awareness of the hazards encountered when working on offshore installations.

Delegates will also gain an understanding of the safety regime and safety management systems in place to control and mitigate those hazards.

View

OPITO Combined FOET
Newcastle

OPITO Further Offshore Emergency Training (FOET) must be completed before an OPITO BOSIET certificate expires. 

Delegates will have the opportunity to practice and demonstrate emergency response skills which are not possible to practice during offshore drills, exercises and emergency training.

View

OPITO Combined HUET
Newcastle

The OPITO Combined HUET (with CA-EBS and Rebeather) course prepares delegates to travel to and from offshore oil and gas installations and vessels by helicopter.

The course provides specific training in pre-flight and in-flight requirements, and equips delegates with the basic emergency response knowledge and skills required in the event of a helicopter emergency – with specific focus on escaping from a helicopter following ditching.

View

Train the Painter - Protective Coatings Applicator (Mandatory)
Newcastle

The Train the Painter applicator training programme has been developed by industry experts who are passionate about training in the protective coatings industry.

View

Train the Painter - Abrasive Blast Cleaner
Newcastle

The Train the Painter applicator training programme has been developed by industry experts who are passionate about training in the protective coatings industry.

View

City and Guilds - High Risk Confined Space
Grimsby

This High Risk course is for personnel nominated to work in or at Confined Spaces where work has been classified as high risk (NC4).

These spaces are primarily enclosed and are a potential hazardous working environment and where self contained breathing apparatus is required to be worn.

View

OPITO Helideck Emergency Response Team Member (HERTM)
Newcastle

OPITO Helideck Emergency Response Team Member (HERTM) training is for Offshore Helideck Assistants.

Delegates will be equipped with the knowledge, understanding and skills required to be part of an offshore emergency response team in helideck and helicopter emergencies.

View

OPITO Offshore Emergency Response Team Leader
Newcastle

OPITO Offshore Emergency Response Team Leader (OERTL) is for current offshore emergency response team leaders, or those who wish to progress into the role.

Delegates will have the opportunity to develop the skills they require to perform the role of team leader in an offshore emergency response team.

View

OPITO Combined Helideck / Offshore Emergency Response Team Member (OERTM/HERTM)
Newcastle

This combined OPITO accredited course will prepare delegates for handling emergency response situations offshore including on the helideck. Successful completion of this combined course will result in the delegate being issued a combined OPITO HERTM and OERTM certificate.

View

OPITO Compressed Air - EBS
Dyce, Grimsby, Newcastle, On-site

This new, mandatory, training programme for offshore workers ensures the delegate gains the required knowledge and understanding of the particular hazards and properties of a Compressed Air Emergency Breathing System (CA-EBS). It includes appropriate practical emergency response actions to take, should the requirement for emergency deployment arise.

View

PCN Level 2 Ultrasonic Testing (UT) 3.1, 3.2
Dyce, Newcastle

This course provides comprehensive knowledge of the theory and practice of ultrasonic testing of welds for technicians to reach the Level II standard. Training accredited to PCN Level 2. This course is suitable for NDT personnel, inspectors, testers and engineers who require a thorough introduction to ultrasonic testing of plates and welded joints.

View

PCN Level 2 Ultrasonic Testing (UT) 3.8, 3.9
Newcastle

The UT 3.8/3.9 course is particularly suitable for UT Level 2 NDT operators. This course provides comprehensive knowledge of the theory and practice of ultrasonic testing of welds for technicians to reach the Level II standard. Training accredited to PCN Level 1 and 2.  

View

Magnetic Particle Inspection PCN Level 2
Newcastle

This course provides comprehensive knowledge of the theory and practice of magnetic particle testing  for candidates to reach the Level 2 standard. You will learn to explain the basic principles of magnetic particle inspection methods, to carry out magnetic particle inspection and to write clear and concise inspection instructions and test reports.

View

Welding Inspection PCN Level 2
Newcastle

The training course provides thorough training and qualification for welding inspection personnel including technicians, inspectors, and engineers called upon to witness, supervise or conduct surveillance welding inspection activities at Level 2.

View

Radiographic Interpretation Level 2
Newcastle

This course is for NDT candidates wishing to carry out Radiographic testing; this course incorporates interpretation of the Radiograph in addition to the techniques used to create the Radiograph. You will learn the difference between Radiographic Testing and Radiographic Interpretation.

View

AIS Advanced Confined Space & Entry
Dyce, Grimsby, Newcastle

For delegates to apply an advanced level of safe working practices in higher risk confined space environments including an introduction to the use of full Breathing Apparatus sets.

View

OPITO Further Offshore Emergency Response Team Leader
Newcastle

This refresher course is designed to meet the further practice requirements not able to be met offshore for Offshore Emergency Response Team Leaders.

View

Working at Height - Unit 2 PPE User
Aberdeen, Dyce, Grimsby, Newcastle

The Working at Height - Unit 2 PPE User course is an exciting programme for those involved in advanced measures of working at height.

Delegates will gain practical skills of instructing within a variety of advanced working at height environments.

View

Shoulder Measurements
Dyce, Grimsby, Newcastle, On-site

This is for getting your shoulder measurements taken. It is done by a trained operative which will allow personnel to travel by helicopter to an offshore installation as required by UK Civil Aviation Authority regulations.

View

CompEx Electrical Refresher
Newcastle

CompEx Electrical Refresher training must be completed within 5 years of the original CompEx Electrical course to remain qualified.

The course can also be attended to provide an overview of explosive atmosphere installation and inspection.

View

Breathing Apparatus Instructors Course
Newcastle

This course will provide a development opportunity for individuals who have been identified within their organisation to be suitable to deliver BA training to Fire Service personnel. The course is designed to increase skills, knowledge and methods of instruction in all aspects of Breathing Apparatus.

View

PCN Level 2 Plate Testing (UT Thickness & Laminations)
Newcastle

This course provides the basic theory and practice of ultrasonic testing and gives the ideal start to a career in ultrasonic’s. This course is suitable for NDT personnel, inspectors and engineers requiring an introduction to ultrasonic inspection.

View

Surface Preparation - Bristle Blaster Training
Dyce, Newcastle, On-site

This course has been designed to ensure operators of the Bristle Blaster Pneumatic and Electric tools achieve an acceptable standard of surface preparation to meet and exceed the requirements of paint, coating and composite manufacturers.

View

Underwater Welding
Newcastle

AIS Training delivers world-class courses to leading industry standards which are accepted worldwide. These are delivered by a commercial diver welder in very small groups giving close, bespoke tuition. We deliver our courses on a customised basis working towards the skills you and your team need. This can cover simple re-qualification’s or re-familiarisation up to advanced underwater welding, codings or cutting courses.

View

HSE Offshore First Aid Refresher
Dyce, Grimsby, Newcastle, On-site

This offshore first aid refresher approved by HSE keeps delegates up to date with their skills in practical and theory first aid procedures. 

View

Working at Height - Unit 1 Height Safety and Harness Awareness
Dyce, Grimsby, Newcastle, On-site

The Working at Height  - Unit 1 Height Safety and Harness Awareness training course is designed to introduce candidates who are not actively involved in working at height to the requirements of regulations.

View

Working at Height - Unit 3 Use of Rescue Equipment
Dyce, Grimsby, Newcastle

The Working at Height  - Unit 3 Use of Rescue Equipment training course is catered towards those whose role involves an advanced measure of working at height, or those who instruct within such an environment.

View

Working at Height - Unit 6 PFPE Inspection
Dyce, Grimsby, Newcastle, On-site

The Working at Height - Unit 6 PFPE Inspection User training course is an exciting programme catered towards candidates who are actively involved in the control of working at height equipment.

View

Visual Testing PCN Level 2
Dyce, Newcastle

Visual testing is a Non-Destructive Testing method by which reflected or transmitted light from a test object is imaged with a light sensitive device. 

View

ITC Advanced First Aid and Incident Management
Dyce, Grimsby, Newcastle, On-site

This is a comprehensive advanced first aid training programme that is offered by AIS training to those working in remote or offshore environments such as the Renewable Energy Industry. In addition to key lifesaving skills and response to common emergencies and minor medical complaints, it also deals with advanced airway management, using various airway adjuncts. The delegates will also cover the use of bag, valve and mask equipment with the addition of oxygen in resuscitation scenarios.

View

OPITO Oil & Gas Fireproofing Training Level 1
Newcastle

The aim and objective of the Level 1 training programme is to give delegates an understanding and awareness of the variety of tasks and hazards found in fireproofing operations on oil and gas installations.

View

ECITB Low Risk Confined Space
Aberdeen, Grimsby, Newcastle

The ECITB Low Risk Confined Space course covers low risk shallow entries no deeper than three metres.

Delegates will learn to use equipment which allows safe access and egress into confined space environments.

View

ECITB Medium Risk Confined Space
Aberdeen, Newcastle

The ECITB Medium Risk Confined Space course covers low risk shallow entries deeper than three metres.

Delegate will learn two methods of entry; staying on and removal from the lifeline.

View

ECITB High Risk Confined Space
Aberdeen, Grimsby, Newcastle

The ECITB High Risk Confined Space course covers primarily enclosed and potentially hazardous working environments.

Delegates will learn to identify risks and implement suitable and sufficient control measures when gaining entry to high risk confined spaces.

View

ECITB Working at Height - Unit 2 PPE User
Grimsby, Newcastle

ECITB Working at Height - Unit 2 PPE User is an exciting training programme for those whose role involves working above ground level.

Delegates will gain practical skills and knowledge of working at height in a variety of environments.

View

ITC Level 2 Award in Basic Life Support and Safe Use of an Automated External Defibrillator
Dyce, Grimsby, Newcastle

This qualification is designed to provide essential lifesaving skills. This training programme has been developed following the current Resuscitation Council (UK) guidelines. 

View

ECITB Medium Risk Confined Space
Grimsby

This course specifically concentrates on medium entries with adequate ventilation, natural or mechanical, where access is simple and unobstructed and there is no likely risk of flooding. Therefore it’s for entries deeper than 3 metres, with an unobstructed vertical lift, a straight ladder into a dark chamber. Delegates will be shown two methods of entry: staying on lifeline to complete the task, where if they collapsed the retrieval equipment would be operated and removal from the life line in where rescue team would be required.

View

AIS LOLER Awareness
Newcastle

LOLER is the prime source of information and guidance with respect to legislation concerning onshore and offshore lifting operations and lifting equipment.

This course is an excellent introduction to safe lifting awareness and can be tailored to your specific organisation or industry sector requirements. It also assists companies whose Safety Management System (SMS) requires lifting operations to be safely managed.

View

AIS Abrasive Wheels
Grimsby

Designed to provide delegates with an understanding of safe working practises when using abrasive wheels.

View

Advanced Offshore First Aid Techniques
Dyce, Grimsby, Newcastle, On-site

This course is designed to upgrade the knowledge of the Offshore First Aider to a level of understanding and skills required to assist the Offshore Medic.

This course is a great add on for those who have completed (or are going to complete) the HSE 4-day Offshore First Aid course.

View

NEBOSH National General Certificate in Occupational Health and Safety
Grimsby, Newcastle, On-site

The National General Certificate is the most widely held health and safety qualification in the UK with over 175,000 people having gained the award since it was launched in 1989.

View

NEBOSH International General Certificate in Occupational Health and Safety
Grimsby, Newcastle

The NEBOSH International General Certificate in Occupational Safety and Health (IGC) is widely respected throughout the world and is essential for anybody working in or looking to work in the field of health and safety. It provides an excellent introduction to occupational safety and health and is suitable for working in all types of organisations and industries.

View

IRATA Rope Access Level 1, 2 & 3
Dyce, Grimsby, Newcastle

IRATA Rope Access courses provide the practical skills and knowledge required for anyone working in any type of rope access role.

AIS Training offer IRATA Rope Access in Levels 1, 2 or 3.

View

Abrasive Wheels Training
Dyce, Newcastle

Designed to provide delegates with an understanding of safe working practises when using abrasive wheels.

View

AIS Electrical Safety Awareness
Newcastle, On-site

Electrical safety training courses for people at all levels and experience. AIS Electrical Safety Training courses can be customised to suit customer requirements and will relate to the type of activities that your personnel may need to carry out.

 

View

AIS Asbestos Awareness
AIS Aberdeen Skills Centre, Dyce, Grimsby, Newcastle, On-site

Asbestos awareness course will inform trainees of the legislation linked to Asbestos

View

Boat Transfer
Newcastle, On-site

This popular course delivers both theoretical and practical safe transfer between Turbine Transfer Vessel and Wind Turbine and again back to Turbine Transfer Vessel.

View

ECITB CCNSG Safety Passport
Dyce, Grimsby, Newcastle, On-site

The ECITB CCNSG Safety Passport training programme is a common prerequisite for anyone working on construction sites.

Delegates will gain an understanding of all aspects of working safely.

View

OPITO Further Offshore Emergency Response Team Member
Newcastle

This refresher course is designed to meet the further practice requirements not able to be met offshore for Offshore Emergency Response Team Members

View

ITC First Aid At Work Level 3 (QCF)
Dyce, Grimsby, Newcastle, On-site

AIS offer a number of different courses, ranging from half day sessions in basic life support to full courses in Offshore First Aid at Work.

View

Insulation Skills Test
Aberdeen, Newcastle

Employers wanting to test the levels of training, skills or competence of existing or prospective employees for offshore insulation workscopes

View

HSE Offshore First Aid
Dyce, Grimsby, Newcastle, On-site

HSE approved Offshore First Aid is a 4 day training course that provides knowledge and understanding of the role of a first aider on offshore installations.

Delegates will become qualified to act as a first aider in the workplace, under the terms of the Health and Safety (first aid) Regulations 1981.

 

View

Offshore Oil & Gas Medical
Newcastle, On-site

Every offshore worker must pass an offshore medical examination which classifies them as medically fit to work in the offshore environment. 

Oil & Gas UK (OGUK) set a standard of fitness for those working offshore in the UK.

View

OPITO Banksman & Slinger Training Stage 1
Newcastle

A Banksman & Slinger is responsible for ensuring safety during crane and slinging operations.

OPITO Banksman & Slinger Training Stage 1 provides delegates with basic knowledge of the activities associated with the combined roles.

View

OPITO Blaster Sprayer Training Level 1
Newcastle

OPITO Blaster Sprayer training courses are widely recognised as the industry standard training for offshore blaster/sprayer operations.

OPITO Blaster Sprayer Level 1 can act as an introduction to newcomers or a useful refresher for experienced blaster/sprayers to test their knowledge.

View

OPITO Blaster Sprayer Competence Assessment (Level 2)
Newcastle, On-site

The Blaster Sprayer Level 2 Competence Assessment is for experienced Blaster/Sprayer personnel. It requires the candidate to carry out designated tasks and demonstrate their knowledge and experience.

View

OPITO MIST
Dyce, Grimsby, Newcastle, On-site

This course is designed to meet the MIST (Minimum Industry Safety Training) standard for personnel who will be working within the Oil and Gas Industry, and complies with the requirements laid down by OPITO.

View

AIS Overhead Crane
Newcastle

AIS Overhead Crane training provides an understanding of the relevant legislation that applies to lifting operations and lifting equipment and accessories.

Delegates will learn to safely and effectively operate overhead cranes.

View

Rope Access Appreciation
Dyce, Grimsby, Newcastle

This is a 1 day taster session for those considering a full rope access training course or career involving rope access work.

View