Find a Course

Control of Subtances Hazardous to Health (COSHH) Assessor training provides the skills to carry out COSHH assessments in conjunction with current legislation. 

Delegates will learn to conduct COSHH assessments in the workplace.

• Quick Book

GWO Sea Survival provides the basic safety training required to safely carry out tasks in and on wind turbines.

Delegates will gain the knowledge and skills required to use possible aids, rescue equipment and methods.

• Quick Book

GWO First Aid provides the skills to administer safe and effective first aid in and on wind turbines.

Delegates will be equipped to meet emergency response training requirements for the wind industry.

• Quick Book

GWO Manual Handling provides the basic safety training requied to carry out manual handling tasks in a safe way.

The training encourages positive manual handling behaviour in the wind industry.

• Quick Book

GWO Fire Awareness provides the basic knowledge to work safely in the wind industry.

Delegates will become familiar with Global Wind Organisation (GWO) emergency response requirements both onshore and offshore.

• Quick Book

GWO Working at Height provides the skills and knowledge to work in a safe manner in the wind industry.

Delegates will meet emergency response training requirements for personnel new to the industry.

• Quick Book

GWO Working at Height Refresher With Manual Handling provides a balance of the knowledge and skills necessary to renew a GWO Working at Height and GWO Manual Handling certification.

Delegates are required to complete refresher training within two years of the initiall courses to remain certified. 

• Quick Book

GWO First Aid Refresher renews the skills required to administer safe and effective first aid on offshore wind installations.

Delegates are required to complete the refresher training within two years of the initial GWO First Aid course to remain certified.

• Quick Book

A GWO Basic Technical Training (BTT) combined course includes GWO Basic Technical Electrical, Hydraulics and Mechanical Training.

Delegates will learn to perform basic tasks under the supervision of an experienced technician.

• Quick Book

ITC Emergency First Aid at Work Including Electric Shock is suitable for personnel who require a first aid certificate with emphasis on the requirements for those working around electricity.

• Quick Book

ECITB Manual Handling provides an understanding of the risks and practical issues involved in manual handling.

Delegates will learn to carry out manual handling tasks in a safe way.

• Quick Book

The City and Guilds 18th Edition IET Wiring Regulations training course familiarises electrical professionals with the changes to the BS 7671:2018 standard.

All electrical professionals must ensure they are familiar with the changes to the standard which came into force in January 2019.

• Quick Book

GWO Enhanced First Aid (EFA) provides the skills to use advanced emergency equipment to save a life in a remote environment.

Delegates will learn to administer safe, effective, and immediate lifesaving and enhanced first aid measures.

• Quick Book

A Norwegian Escape Chutes is an evacuation system which is in place on some offshore installations.

Delegates will gain an understanding of the Norwegian Escape Chute system and practice using it as a tertiary means of escape.

• Quick Book

Basic Welding training is for those who required welding training but do not require a coded welding certificate.

• Quick Book

ECITB SBT01 - Assemble and Install Small Bore Tubing with Twin Ferrule Mechanical Grip Fittings meets the ECITB training requirements for small bore tubing engineers and personnel.

• Quick Book

ECITB Leading a Team Safely (LaTS) focuses on the essentials of being a leader.

Delegates will learn the health and safety responsibilities of supervisory staff when planning, implementing and reviewing.

• Quick Book

Working at Height - Unit 7 Practical Management of Working at Height covers both Working at Height - Unit 2 PPE User and Working at Height - Unit 4 Management of Working at Height.

Delegates will learn to comply with working at height regulations in a management or supervisory role.

• Quick Book

Working at Height - Unit 5 Portable Ladder Usage and Inspection provides the necessary skills and knowledge to safely use portable ladders and step ladders.

• Quick Book

Manual Handling Assessor training provides the skills to conduct manual handling risk assessments in the workplace.

The classroom-based training can be completed using generic or company-specific documentation and systems.

• Quick Book

Benzene Awareness training provides a basic awareness of benzene and the risks involved in working with the substance.

PLEASE NOTE: This training is delivered at our Aberdeen training centre. 

• Quick Book

GWO Basic Technical Training (BTT) Hydraulics provides the knowledge and skills to carry out basic hydraulic tasks on a wind installation.

Delegates will learn to use safe working procedures and correct personal protective equipment (PPE).

• Quick Book

GWO Basic Technical Training (BTT) Electrical provides the knowledge and skills to carry out basic electrical tasks on a wind installation.

Delegates will learn to use working procedures and correct personal protective equipment.

• Quick Book

GWO Basic Technical Training (BTT) Mechanical provides the knowledge and skills to carry out basic mechanical tasks on a wind installation.

Delegates will learn to use safe working procedures and personal protective equipment (PPE).

• Quick Book

ECITB Becoming an Effective Communicator is part of the supervisor training programmes which have been developed by ECITB.

Delegates will learn key communication and management skills required in a supervisory role.

• Quick Book

AIS Survivex are an ECITB approved test centre.

Delegates can complete a range of ECITB Knowledge Tests in subject areas that include electrical installation, electrical maintenance, mechanical maintenance, pipefitting, rigging and plating.

• Quick Book

AIS Survivex have developed an introductory rigger training course that provides delegates with the knowledge and skills to safely carry out basic rigging and lifting operations.

• Quick Book

Fire Warden training enables personnel with enhanced safety roles to meet the training requirements for fire safety in the workplace.

Delegates will gain a necessary understanding of fire and fire procedures detailed in current legislation.

• Quick Book

ITC First Aid At Work Level 3 (RQF) Refresher updates and refreshers knowledge of the first aid at work syllabus, while allowing time for revision and practice sessions in preparation for a practical assessment.

• Quick Book

The CompEx Foundation course provides knowledge and understanding of the terminology and protection concepts used in a potentially flammable atmosphere.

For full participation, delegates are required to have no prior knowledge of flammable or potentially explosive atmospheres.

• Quick Book

Fireproofing is designed to protect the structural steelwork of an oil and gas installation in the event of an explosion or fire.

If successfully completed, the OPITO Oil & Gas Industry Fireproofing Competence Assessment (Level 2) allows delegates to become OPITO-certified in fireproofing.

• Quick Book

Competent insulation practitioners fit insulation systems to pipework, equipment and structures, and have an understanding of appropriate thermal, acoustic, cryogenic, personal protection and passive fireproofing insulation systems.

If successfully completed, the OPITO Application of Insulation Systems Competence Assessment (Level 2) allows delegates to become an OPITO-certified insulation practitioner.

• Quick Book

The CISRS Part 1 Scaffolding Tube and Fitting training course reinforces the core skills of scaffolding, including how to safety erect, alter and dismantle strucutres.

Delegates will gain an improved knowledge of using tube and fitting or system scaffolding.

• Quick Book

This 1 day CISRS COTS course introduces new scaffolders to the industry, and allows CISRS card holders to renew their card once it expires.

Delegates will learn the basics of scaffolding and understand how to work safely with scaffolding and access equipment.

• Quick Book

IPAF Mobile Elevated Work Platform (MEWP) training is beneficial in all workplace sectors.

Delegates will learn how to correctly operate common pieces of equipment that are used within the workplace in a wide variety of industries.

• Quick Book

Advanced Hub Rescue provides the specialist skills and knowledge to rescue personnel incapacitated in various sections of a turbine including the hub.

Delegates will learn to react in a safe, effective and prompt manner to stabilise a casualty.

• Quick Book

OPITO Basic Offshore Safety Induction and Emergency Training (BOSIET) with CA-EBS provides an understanding and awareness of the hazards encountered when working on offshore installations. It is often referred to as 'offshore survival training'.

This course includes the use of a Compressed Air Emergency Breathing System (CA-EBS), which is considered the North Sea BOSIET requirement.

• Quick Book
• Watch the film

OPITO Further Offshore Emergency Training (FOET) with CA-EBS provides the opportunity to practice and demonstrate emergency response skills which are not possible to practice during offshore drills, exercises and emergency training. It is often refrerred to as an 'offshore survival refresher'.

This course includes the use of a Compressed Air Emergency Breathing System (CA-EBS), which is considered the North Sea FOET requirement.

• Quick Book

OPITO Helicopter Underwater Escape Training (HUET) with CA-EBS prepares delegates to travel to and from offshore oil and gas installations and vessels by helicopter.

This course includes the use of a Compressed Air Emergency Breathing System (CA-EBS), which is the North Sea HUET requirement.

• Quick Book

Working at Height - Unit 4 Managers and Supervisors demonstrates a selection of working at height techniques.

Delegates will gain a comprehensive understanding of site managers and supervisors responsibilities under the Health and Safety at Work Act 1974 and its supporting regulations.

• Quick Book

This training programme has been designed for novices with little or no previous FLT driving experience (or for those with no formal FLT qualification). Please note that course durations will vary depending on how many are booked onto the course.

PLEASE NOTE: Unfortunately we cannot currently offer this course to self-funder delegates.

• Quick Book

ECITB Mechanical Joint Integrity MJI10: Hand Torque Bolted Connection Techniques concentrates on the skilled performance required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque.

This technically detailed course is delivered to the latest ECITB standards.

• Quick Book

ECITB Mechanical Joint Integrity MJI18: Hydraulic Tension Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening bolted connections using hydraulic tensioning equipment.

The technically detailed course is delivered to the latest ECITB standards.

• Quick Book

ECITB Mechanical Joint Integrity MJI19: Hydraulic Torque Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening flanged and clamp connector pipe joints using hydraulic torque equipment.

The technically detailed course is delivered to the latest ECITB standards.

• Quick Book

This ECITB Mechanical Joint Integrity course is a combination of MJI10 and MJI19 which are stage one of the four stage ECITB MJI training standards validating skills in the specialist critial bolting area. 

Delegates will gain the skills required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque and hydraulic torque equipment.

• Quick Book

OPITO combined Basic Offshore Safety Induction and Emergency Training (BOSIET) training provides an understanding and awareness of the hazards encountered when working on offshore installations. It is often referred to as 'offshore survival training'.

This course includes Compressed Air Emergency Breathing System (CA-EBS) and Emergency Breathing System (EBS), sometimes referred to as a rebreather. This is considered the international BOSIET requirement.

• Quick Book
• Watch the film

OPITO combined FOET includes the OPITO Further Offshore Emergency Training (FOET) with Emergency Breathing System (EBS) and Compressed Air Emergency Breathing System (CA-EBS). This is considered the international FOET requirement. It is often refrerred to as an 'offshore survival refresher'.

Delegates will have the opportunity to practice and demonstrate emergency response skills which are not possible to practice during offshore drills, exercises and emergency training.

• Quick Book

Train The Painter - Protective Coatings Applicator is a mandatory course for delegates completing the SSPC Train The Painter programme.

The Train the Painter programme has been developed by industry experts who are passionate about training in the protective coatings industry.

• Quick Book

Train The Painter - Abrasive Blast Cleaner is a module of SSPC Train The Painter.

The Train the Painter applicator training programme has been developed by industry experts who are passionate about training in the protective coatings industry.

• Quick Book

CISRS Basic Scaffold Inspection is aimed at scaffolders responsible for inspecting and checking basic scaffolds.

Delegates will develop an understanding of scaffolding components, forms and construction and inspection procedures of basic access scaffolds.

• Quick Book

OPITO Compressed Air Emergency Breathing System (CA-EBS) Initial Deployment Training is now a mandatory requirement for offshore workers.

Delegates will learn the particular hazards and properties of a CA-EBS.

• Quick Book

ITC Emergency First Aid at Work Level 3 (RQF) may be more suitable for lower-risk work environments such as offices and/or organsations with fewer than 100 employees.

• Quick Book

S-Cape is an evacuation system which is in place on some offshore installations.

Delegates will be provided with the skills and knowledge to use the S-Cape system.

• Quick Book

All personnel who travel by helicopter to an offshore installation are required to have their shoulders formally measured by a specially trained person.

Anyone who hasn’t had their shoulder width measured will be classified automatically as Extra Broad (XBR). This restricts the seats you’re permitted to sit in and therefore can mean that you won’t be allowed on certain flights.

• Quick Book

IOSH Working Safely is a one day course for personnel at any level, in any sector.

Delegates will gain an understanding of health and safety and how to make a real difference to the wellbeing of themselves and others through changing behaviour.

• Quick Book

AIS Survivex have developed lifting and hoisting training that is specific to wind turbines for personnel working in the wind industry or related fields.

• Quick Book

Surface Preparation - Bristle Blaster training provides the knowledge and skills to operate bristle blaster tools.

This course is designed to exceed the requirements of paint, coating and composite manufacturers.

• Quick Book

Rollgliss R350 Working at Height and Rescue provides delegates with the skills and knowledge to work and perform rescues using the Rollgliss R350 rope system.

• Quick Book

The Working at Height  - Unit 1 Height Safety and Harness Awareness training course is designed to introduce candidates who are not actively involved in working at height to the requirements of regulations.

• Quick Book

The Working at Height  - Unit 3 Use of Rescue Equipment training course is an exciting programme for those whose role involves performing rescues at height.

• Quick Book

Fireproofing is designed to protect the structural steelwork of an oil and gas installation in the event of an explosion or fire.

OPITO Oil & Gas Industry Fireproofing Training (Level 1) provides delegates with an understanding and awareness of the tasks and hazards found in fireproofing operations on oil and gas installations.

• Quick Book

The ECITB Low Risk Confined Space course covers low risk shallow entries no deeper than three metres.

Delegates will learn to use equipment which allows safe access and egress into confined space environments.

• Quick Book

The ECITB Medium Risk Confined Space course covers low risk shallow entries deeper than three metres.

Delegate will learn two methods of entry; staying on and removal from the lifeline.

• Quick Book

ECITB Working at Height is an exciting training programme for those whose role involves working above ground level.

Delegates will gain practical skills and knowledge of working at height in a variety of environments.

• Quick Book

Abrasive wheels are often fitten in grinding machines for various grinding and cutting operations.

Abrasive Wheels training provides an understanding of safe working practices when using abrasive wheels.

• Quick Book

Electrical Safety Awareness training can be customised to suit specific delegate requirements and the type of activities carried out by the delegate in their workplace.

• Quick Book

Manual Handling training provides an understanding of the risks and practical issues involved with manual handling.

• Quick Book

Personnel who may come across asbestos or asbestos-containing materials must be appropriately trained to work safely and avoid disturbing or damaging the hazardous substance.

This Asbestos Awareness course provides an introduction to the potential damage to health which can be caused by coming into contact with asbestos.

• Quick Book

The ECITB CCNSG Safety Passport training programme is a common prerequisite for anyone working on construction or engineering sites.

Delegates will gain an understanding of all aspects of working safely.

• Quick Book

This ECITB Mechanical Joint Integrity course is a combination of MJI10, MJI18 & MJI19 which are stage one of the four stage ECITB MJI training standards validating skills in the specialist critial bolting area. 

These training standards cover isolations, dismantling techniques, inspection of components, alignment techniques and clamp connectors as well as assembly and tightening techniques in specialist critical bolting.

• Quick Book

ITC First Aid at Work Level 3 (RQF) training provides an introduction to first aid in the workplace.

• Quick Book

IOSH Managing safely is a three day course for personnel responsible for the effective management of health and safety in the workplace.

Delegates will gain knowledge of key health and safety issues including environmental protection.

• Quick Book

OPITO Offshore Emergency Response Team Member (OERTM) training prepares offshore emergency response teams to react safely and effectively in the unfortunate event of an offshore emergeny situation.

PLEASE NOTE: This course is delivered at Offshore Training Newcastle (OTN) at Newcastle International Airport Training Academy or Vital Fire Solutions at County Durham and Darlington Fire and Rescue Service Training Centre.

• Quick Book

HSE approved Offshore First Aid training is a 4 day training course that provides knowledge and understanding of the role of a first aider on offshore installations.

Delegates will become qualified to act as a first aider in the workplace, under the terms of the Health and Safety (first aid) Regulations 1981.

• Quick Book
• Watch the film

Oil & Gas UK (OGUK) set a standard of fitness for those working offshore in the UK.

Every offshore worker must pass an OGUK offshore medical examination which classifies them as medically fit to work in the offshore environment. 

• Quick Book

Application of insulation is designed to protect the environment, equipment and personnel, control noise, reduce energy costs and increase process efficiency.

OPITO Application of Insulation Systems Training (Level 1) provides delegates with the skills to understand and fit insulation systems to pipework, equipment and structures.

• Quick Book

OPITO Blaster-Sprayer training courses are widely recognised as the industry standard training for offshore blaster/sprayer operations.

OPITO Blaster-Sprayer Training (Level 1) can act as an introduction to newcomers or a useful refresher for experienced blaster/sprayers to test their knowledge.

• Quick Book

Hydrogen sulphide (H2S) gas is a key hazard which affects operations in the oil and gas industry.

OPITO Basic H2S Training provides relevant information and legislation on the characteristics, effects and detection of H2S gas.

• Quick Book

OPITO Rigger training courses are widely recognised as the industry standard training for offshore rigging and lifting operations.

OPITO Rigger Initial is for those who have little or no training or experience.

• Quick Book

Overhead Crane training provides an understanding of the relevant legislation that applies to lifting operations and lifting equipment and accessories.

Delegates will learn to safely and effectively operate overhead cranes.

• Quick Book

AIS Survivex have developed risk assessment training that provides delegates with an understanding of producing lifting plans and risk assessments.

• Quick Book

AIS Survivex have developed an introductory banksman slinger training course providing delegates with the knowledge and skills to safely carry out basic banksman and slinger operations.

• Quick Book

The ECITB CCNSG Safety Passport Refresher training programme must be completed within 3 years of gaining a CCNSG Safety Passport Card to remain certified.

Delegates will refresh their understanding of all aspects of working safely.

• Quick Book

Escape chutes are used as a means of escape, where fitted, from offshore oil and gas installations and vessels. The aim of this training programme is to give students an understanding of the Norwegian Sector escape chute system used in the industry and practice their use as a means of tertiary escape from offshore installations and vessels.

• Quick Book