Find a Course

Industrial

AIS Training deliver a range of world-class courses for industrial sectors including Rope Access, OPITO Banksman Slinger, Rigging and Lifting and Non Destructive Testing.

IRATA Rope Access Level 1, 2 or 3
Dyce, Newcastle

IRATA Rope Access training courses provide the practical skills and knowledge required for anyone working in any type of rope access role.

AIS Training offer IRATA Rope Access in Levels 1, 2 or 3.

View

OPITO Banksman & Slinger Training Stage 1
Newcastle

A Banksman and Slinger is responsible for ensuring safety during crane and slinging operations.

OPITO Banksman and Slinger Training Stage 1 provides delegates with basic knowledge of the activities associated with the combined roles.

View

OPITO Rigger Training Stage 1
Newcastle

OPITO Rigger training courses are widely recognised as the industry standard training for offshore rigging and lifting operations.

OPITO Rigger Stage 1 is for those who have little or no training or experience.

View

CISRS COTS (CISRS Operative Training Scheme)
Dyce, Newcastle, On-site, South Wales

This 1 day CISRS COTS course introduces new scaffolders to the industry, and allows CISRS card holders to renew their card once it expires.

Delegates will learn the basics of scaffolding and understand how to work safely with scaffolding and access equipment.

View

BINDT Dye Penetrant Inspection PCN Level 2
Newcastle, TWI (Aberdeen)

Dye Penetrant Inspection is a category of non-destructive testing (NDT) commonly used to locate surface-breaking defects in all non-porous materials using dye.

Delegates will work on test pieces and industrial components with emphasis on interpretation of defect indications.

View

IOSH Working Safely
Dyce, Newcastle, On-site

IOSH Working Safely is a one day course for personnel at any level, in any sector.

Delegates will gain an understanding of health and safety and how to make a real difference to the wellbeing of themselves and others through changing behaviour.

View

ECITB Mechanical Joint Integrity (MJI10, MJI18, MJI19)
Dyce, Newcastle

This ECITB Mechanical Joint Integrity course is a combination of MJI10, MJI18 & MJI19 which are stage one of the four stage ECITB MJI training standards validating skills in the specialist critial bolting area. 

These training standards cover isolations, dismantling techniques, inspection of components, alignment techniques and clamp connectors as well as assembly and tightening techniques in specialist critical bolting.

View

OPITO Application of Insulation Systems Training Level 1
Newcastle

Installing an effective insulation system can protect equipment and personnel, control noise emissions, reduce energy costs and increase process efficiencies. With an appropriate product, installed correctly in a professional and effective manner, Insulation Applicators can provide monetary gains which outstrip the initial costs, while contributing positively to health & safety.

View

ECITB CCNSG Safety Passport - Refresher
Dyce, Newcastle, On-site

The ECITB CCNSG Safety Passport Refresher training programme must be completed within 3 years of gaining a CCNSG Safety Passport Card to remain certified.

Delegates will refresh their understanding of all aspects of working safely.

View

COSHH Assessor Training
Dyce, Newcastle

This course will enable anyone responsible for the management and conducting of COSHH assessments in the workplace to recognise the requirement for a COSHH assessment, and for them to carry out these assessments methodically and in conjunction with current legislation.

View

ITC Emergency First Aid at Work Incl Electric Shock
Dyce, Newcastle

The ITC Emergency First Aid at Work with electric shock is suitable for those requiring a first aid certificate with emphasis on the requirements for those working around electricity. Successfully completing the ITC Emergency First Aid at Work will enable the candidate to act as a first aider in the workplace.

All AIS first aid courses are tailored to suit your particular needs and include all training materials, workbooks, examinations and certificates.

While the content of courses is obviously about as serious as anything could be, we have developed training methods designed to make taking a AIS first aid course an enjoyable experience as well as a valuable one.

View

PUWER Assessor
Newcastle, On-site

Provision and Use of Work Equipment Regulations (PUWER) ensures companies who own, operate or have control over work equipment must manage the risks from that equipment.

Delegates will gain the knowledge and skills to ensure their organisation meets PUWER standards.

View

Electricity at Work Regulations 1989
Dyce

Electricty at Work Regulations 1989 training addresses the application of the legislation which places legal implications on employers to ensure the safety of electrical devices in the workplace.

PLEASE NOTE: This training is delivered at our sister company Survivex's location. 

View

OPITO Major Emergency Management - Initial Response (MEM-IR)
Dyce

OPITO Major Emergency Management - Initial Response (MEM-IR) training focuses on current major emergency management practices and techniques.

PLEASE NOTE: This training is delivered at our sister company Survivex's location. 

View

Train the Painter - Gold
Newcastle

Train The Painter - Gold is a combined course including the Abrasive Blast Cleaner, Protective Coatings Applicator and Sprayer Painter modules of SSPC Train the Painter.

The Train the Painter applicator training programme has been developed by industry experts who are passionate about training in the protective coatings industry.

View

ECITB TMJI - 10-11-18-19-20 Combined
Dyce, Newcastle

ECITB Technical Mechanical Joint Integrity (TMJI) training is stage 3 in the ECITB/Step Change in Safety MJI model. This course includes all five modules.

The training is for delegates who have completed all stage 1 modules (MJI10, MJI18 and MJI19) and stage 2 (workplace practice) and need to update their knowledge before taking stage 4 (ECITB Technical Tests).

View

Eddy Current Testing PCN Level 1 & 2 Combined
Dyce, Newcastle

Eddy Current is a non-destructive testing (NDT) technique using electrical currents to inspect inside conductive materials.

This combined level 1 and 2 course provides a comprehensive introduction to the Eddy Current testing method.

View

Working at Height - Unit 5 Portable Ladder Usage and Inspection
Newcastle

The aim of this half day course is to provide the necessary skills and knowledge to inspect, produce records and safely use portable ladders and step ladders.

View

Benzene Awareness
Dyce

This half day course is designed to give the candidate the basic knowledge, skills and attitudes to identify the risks involved in working with Benzene and a potentially hazardous environment.

View

CISRS Scaffolding CPD Refresher
Dyce, Newcastle, On-site, South Wales

The CISRS Scaffolding CPD Refresher course has been introduced to ensure the highest possible standard of scaffolding safety is being maintained throughout the industry.

Delegates who hold a CISRS card must complete the training before card renewal.

View

ECITB Becoming an Effective Communicator
Newcastle

ECITB Becoming an Effective Communicator is part of the supervisor training programmes which have been developed by ECITB.

Delegates will learn key communication and management skills required in a supervisory role.

View

ECITB Technical Mechanical Joint Integrity (TMJI)
Dyce, Newcastle, On-site

ECITB Technical Mechanical Joint Integrity (TMJI) training is stage 3 in the ECITB/Step Change in Safety MJI model. This course allows you to book individual modules.

The training is for delegates who have completed the corresponding stage 1 modules (MJI10, MJI18 or MJI19) and stage 2 (workplace practice) and need to update their knowledge before taking stage 4 (ECITB Technical Tests).

View

Fire Warden Training
Newcastle, On-site

This course is to enable staff with an enhanced saftey roles to meet the the training requirmenets detailed in the Department for Communites and Local Government guidance and current workplace fire safety legislation.

View

ITC First Aid At Work Level 3 (RQF) Refresher
Dyce, Newcastle, On-site

The course aims to update and refresh your knowledge of the First Aid at Work syllabus, while allowing time for revision and practice sessions in preparation for a practical and written assessment.

View

CompEx Foundation
Newcastle

The CompEx Foundation course provides knowledge and understanding of the terminology and protection concepts used in a potentially flammable atmosphere.

For full participation, delegates are required to have no prior knowledge of flammable or potentially explosive atmospheres.

View

OPITO Application of Insulation Systems Competence Assessment (Level 2)
Newcastle, On-site

The OPITO Approved Application of Insulation Systems Competence Assessment Level 2 Standard specifies the assessment process and criteria for the candidate to demonstrate competence in the role an insulation practitioner. Successful candidates will be awarded an OPITO certificate of competence.

View

CISRS Part 1 Scaffolding Tube & Fitting
Newcastle, South Wales

The CISRS Part 1 Scaffolding Tube and Fitting training course reinforces the core skills of scaffolding, including how to safety erect, alter and dismantle strucutres.

Delegates will gain an improved knowledge of using tube and fitting or system scaffolding.

View

IPAF (Mobile Elevated Work Platform Training)
Newcastle

IPAF Mobile Elevated Work Platform (MEWP) training is beneficial in all workplace sectors.

Delegates will learn how to correctly operate common pieces of equipment that are used within the workplace in a wide variety of industries.

View

Working at Height - Unit 4 Managers and Supervisors
Dyce, Newcastle, On-site

Working at Height - Unit 4 Managers and Supervisors demonstrates a selection of working at height techniques.

Delegates will gain a comprehensive understanding of site managers and supervisors responsibilities under the Health and Safety at Work Act 1974 and its supporting regulations.

View

ECITB MJI18: Hydraulic Tension Bolted Connection Techniques
Dyce, Newcastle

ECITB Mechanical Joint Integrity MJI18: Hydraulic Tension Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening bolted connections using hydraulic tensioning equipment.

The technically detailed course is delivered to the latest ECITB standards.

View

ECITB Mechanical Joint Integrity (MJI10 & MJI19)
Dyce, Newcastle, On-site

This ECITB Mechanical Joint Integrity course is a combination of MJI10 and MJI19 which are stage one of the four stage ECITB MJI training standards validating skills in the specialist critial bolting area. 

Delegates will gain the skills required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque and hydraulic torque equipment.

View

Train the Painter - Protective Coatings Applicator (Mandatory)
Newcastle

Train The Painter - Protective Coatings Applicator is a mandatory course for delegates completing the SSPC Train The Painter.

The Train the Painter applicator training programme has been developed by industry experts who are passionate about training in the protective coatings industry.

View

Train the Painter - Abrasive Blast Cleaner
Newcastle

Train The Painter - Abrasive Blast Cleaner is a module of SSPC Train The Painter.

The Train the Painter applicator training programme has been developed by industry experts who are passionate about training in the protective coatings industry.

View

Train the Painter - Sprayer Painter
Newcastle

Train The Painter - Spray Painter is a module of SSPC Train The Painter.

The Train the Painter applicator training programme has been developed by industry experts who are passionate about training in the protective coatings industry.

View

OPITO Helideck Emergency Response Team Member (HERTM)
Newcastle

OPITO Helideck Emergency Response Team Member (HERTM) training prepares offshore emergency response teams for helideck and helicopter emergencies.

PLEASE NOTE: This course is delivered at Offshore Training Newcastle (OTN) at Newcastle International Airport Training Academy.

View

BINDT Ultrasonic Testing (UT) 3.1, 3.2 PCN Level 2
Dyce, Newcastle, TWI (Aberdeen)

Ultrasonic Testing (UT) is a category of non-destructive testing which uses sound currents to inspect inside a material.

This British Institute of Non-Destructive Testing (BINDT) PCN Level 2 course includes ultrasonic testing of plate (3.1) and pipe (3.2) welds.

View

BINDT PCN Level 2 Ultrasonic Testing (UT) 3.8, 3.9
Newcastle

Ultrasonic Testing (UT) is a category of non-destructive testing which uses sound currents to inspect inside a material.

This British Institute of Non-Destructive Testing (BINDT) PCN Level 2 course includes ultrasonic testing of nozzle (3.8) and node (3.9) welds.

View

BINDT Magnetic Particle Inspection (MPI) PCN Level 2
Newcastle, TWI (Aberdeen)

Magnetic Particle Inspection (MPI), sometimes referred to as Magnetic Testing (MT), is a category of non-destructive testing (NDT) commonly used to locate surface defects in ferromagnetic materials.

Delegates will inspect welds, castings and forgings using magnetising methods.

View

BINDT Welding Inspection PCN Level 2
Newcastle

The training course provides thorough training and qualification for welding inspection personnel including technicians, inspectors, and engineers called upon to witness, supervise or conduct surveillance welding inspection activities at Level 2.

View

Working at Height - Unit 2 PPE User
Dyce, Newcastle

The Working at Height - Unit 2 PPE User training course is an exciting programme for those who work above ground at any level.

View

CompEx Electrical Refresher
Newcastle

CompEx Electrical Refresher training must be completed within 5 years of the original CompEx Electrical course to remain qualified.

The course can also be attended to provide an overview of explosive atmosphere installation and inspection.

View

BINDT Level 2 Plate Testing (UT Thickness & Laminations)
Newcastle

Ultrasonic Testing (UT) is a category of non-destructive testing which uses sound currents to inspect inside a material.

This British Institute of Non-Destructive Testing (BINDT) PCN Level 2 course includes ultrasonic testing of lamination and thickness of steel plates.

View

Surface Preparation - Bristle Blaster Training
Dyce, Newcastle, On-site

Surface Preparation - Bristle Blaster training provides the knowledge and skills to operate bristle blaster tools.

This course is designed to exceed the requirements of paint, coating and composite manufacturers.

View

Rollgliss R350 Working at Height and Rescue
Newcastle

This training has been developed to provide employees a safer and more ergonomic work positioning tool, when performing e.g. cable work in the tower or work on top of the spinner or for rescue. This simple and very effective piece of equipment is ideal for performing what would normally be difficult rescues to execute.

View

Working at Height - Unit 1 Height Safety and Harness Awareness
Dyce, Newcastle, On-site

The Working at Height  - Unit 1 Height Safety and Harness Awareness training course is designed to introduce candidates who are not actively involved in working at height to the requirements of regulations.

View

Working at Height - Unit 3 Use of Rescue Equipment
Dyce, Newcastle

The Working at Height  - Unit 3 Use of Rescue Equipment training course is an exciting programme for those whose role involves performing rescues at height.

View

Working at Height - Unit 6 PPE Inspection
Dyce, Newcastle, On-site

The Working at Height - Unit 6 PFPE Inspection User training course is an exciting programme catered towards candidates who are actively involved in the control of working at height equipment.

View

ITC Level 2 Award in Basic Life Support and Safe Use of an Automated External Defibrillator
Dyce, Newcastle

This qualification is designed to provide essential lifesaving skills. This training programme has been developed following the current Resuscitation Council (UK) guidelines. 

View

NEBOSH National General Certificate in Occupational Health and Safety
Newcastle, On-site

The NEBOSH National General Certificate in Occupational Health and Safety is the most popular and recognised health and safety qualification of its kind.

Delegates will learn to  identify, evaluate and control a wide range of workplace hazards.

View

NEBOSH International General Certificate in Occupational Health and Safety
Newcastle

The NEBOSH International General Certificate in Occupational Safety and Health is widely respected throughout the world.

Delegates will gain an excellent introduction to occupational safety and health in all types of organisations and industries.

View

Abrasive Wheels Training
Dyce, Newcastle

Designed to provide delegates with an understanding of safe working practises when using abrasive wheels.

View

Electrical Safety Awareness
Newcastle, On-site

Electrical safety training courses for people at all levels and experience. AIS Electrical Safety Training courses can be customised to suit customer requirements and will relate to the type of activities that your personnel may need to carry out.

 

View

Asbestos Awareness
Dyce, Newcastle, On-site

Personnel who may come across asbestos or asbestos-containing materials must be appropriately trained to work safely and avoid disturbing or damaging the hazardous substance.

This Asbestos Awareness course provides an introduction to the potential damage to health which can be caused by coming into contact with asbestos.

View

ECITB CCNSG Safety Passport
Dyce, Newcastle, On-site

The ECITB CCNSG Safety Passport training programme is a common prerequisite for anyone working on construction or engineering sites.

Delegates will gain an understanding of all aspects of working safely.

View

ITC First Aid At Work Level 3 (RQF)
Dyce, Newcastle, On-site

AIS offer a number of different courses, ranging from half day sessions in basic life support to full courses in Offshore First Aid at Work.

View

IOSH Managing Safely
Dyce, Newcastle, On-site

IOSH Managing safely is a three day course for personnel responsible for the effective management of health and safety in the workplace.

Delegates will gain knowledge of key health and safety issues including environmental protection.

View

OPITO Banksman Slinger Competence Assessment (Stage 3 & 4)
Dyce, Newcastle, On-site

A banksman and slinger is responsible for ensuring safety during crane and slinging operations.

If successfully completed, the OPITO Banksman and Slinger Competence Assessment (Stages 3 or 4) allows delegates to become an OPITO certified banksman.

View

OPITO Blaster Sprayer Training Level 1
Newcastle

OPITO Blaster Sprayer training courses are widely recognised as the industry standard training for offshore blaster/sprayer operations.

OPITO Blaster Sprayer Level 1 can act as an introduction to newcomers or a useful refresher for experienced blaster/sprayers to test their knowledge.

View

OPITO Blaster Sprayer Competence Assessment (Level 2)
Newcastle, On-site

The Blaster Sprayer Level 2 Competence Assessment is for experienced Blaster/Sprayer personnel. It requires the candidate to carry out designated tasks and demonstrate their knowledge and experience.

View

OPITO Rigger Competence Assessment (Stage 3 & 4)
Dyce, Newcastle, On-site

OPITO rigger training courses are widely recognised as the industry standard for offshore rigging and lifting operations.

If successfully completed, the OPITO Rigger Competence Assessments (Stages 3 & 4) allow delegates to become an OPITO certified rigger.

View

Risk Assessment Training
Dyce, Newcastle, On-site

AIS Training have developed risk assessment training that provides delegates with an understanding of producing lifting plans and risk assessments.

View