ECITB Technical Test - TICA-A01 Industrial Coatings Airless Spray Application
TICA-A01 Industrial Coatings Airless Spray Application is a Sprayer Blaster Painter ECITB Technical Test.
These tests are aimed at both onshore and offshore fabric maintenance personnel who may be required to complete a "trade test" before their employment is started or approved.
Course Overview
The ECITB Technical Test - TICA-A01 Industrial Coatings Airless Spray Application includes a one hour knowledge test and a three hour practical test.
The three hour practical test consists of conducting any pre-cleaning of an abrasive blast cleaned mild steel blast plate to a specific standard in readiness for application of a protective coating. This is followed by the application of an industrial two-part coating to a specified dry film thickness without any rectification works. During the test the delegate will undertake the spray gun operator and pump man roles.
PLEASE NOTE: Delegates must pass the knowledge test to progress to the practical test.
Course Objectives
Delegates completing an ECITB Technical Test - TICA-A01 Industrial Coatings Airless Spray Application will be able to;
- Correctly select and set-up the airless spray equipment in a safe and efficient manner
- Undertake all necessary checks to ensure all equipment is ready to use
- Check associated items such as power (air/electric), paint lines, spray gun/tip and safety devices
- Ensure there is no dust/debris contamination on a prepared mid steel test plate
- Monitor and recode environmental conditions throughout application
Course Content
An ECITB Technical Test - TICA-A01 Industrial Coatings Airless Spray Application includes;
- Barriers/signage (warning notices)
- Risk Assessments and COSHH assessments are available/conducted
- Method statement for the task available and understood
- Toolbox talks (if available) conducted and signed
- Paint test panel as per ASTM D4228 Standard Practice for Qualification of Coating
Prerequisites
There are no prerequisites for the ECITB Technical Test - TICA-A01 Industrial Coatings Airless Spray Application.
ECITB Technical Tests - Sprayer Blaster Painter
The ECITB Technical Tests available for Sprayer Blaster Painter include:
- TICA-P 01 Abrasive Blast Cleaning (Direct Pressure)
- TICA-A02 Industrial Coatings Brush Application
- TICA-A01 Industrial Coatings Airless Spray Application