not visible
Begin your offshore career in the wind industry with a GWO Basic Safety Training (BST) Package.
AIS Survivex have created a discounted package of the five mandatory GWO courses required in the wind industry.
OPITO Basic Offshore Safety Induction and Emergency Training (BOSIET) with CA-EBS provides an understanding and awareness of the hazards encountered when working on offshore installations. It is often referred to as 'offshore survival training'.
This course includes the use of a Compressed Air Emergency Breathing System (CA-EBS), which is considered the North Sea BOSIET requirement.
OPITO Further Offshore Emergency Training (FOET) with CA-EBS provides the opportunity to practice and demonstrate emergency response skills which are not possible to practice during offshore drills, exercises and emergency training. It is often refrerred to as an 'offshore survival refresher'.
This course includes the use of a Compressed Air Emergency Breathing System (CA-EBS), which is considered the North Sea FOET requirement.
A Banksman and Slinger is responsible for ensuring safety during crane and slinging operations.
OPITO Banksman & Slinger Initial Training provides delegates with basic knowledge of the activities associated with the combined roles.
OPITO Rigger training courses are widely recognised as the industry standard training for offshore rigging and lifting operations.
OPITO Rigger Initial is for those who have little or no training or experience.
IRATA Rope Access training courses provide the practical skills and knowledge required for anyone working in any type of rope access role.
AIS Survivex offer IRATA Rope Access training in Levels 1, 2 or 3.
GWO Blade Repair (BR) training provides the skills, knowledge and confidence to demonstrate safe craftmanship when working with blade repair and inspection in the wind industry.
Delegates will learn to repair the damage to a wind turbine blade and bring it back to its original form while maintaining and aerodynamical state.
Confined Space training provides an awareness of working in low or medium risk confined space environments.
OPITO Digital-Basic Offshore Safety Induction and Emergency Training (D-BOSIET) with CA-EBS provides an understanding and awareness of the hazards encountered when working on offshore installations.
This digital version of BOSIET uses a blended learning approach by combining e-learning at home with practical training in the centre.
Control of Subtances Hazardous to Health (COSHH) Assessor training provides the skills to carry out COSHH assessments in conjunction with current legislation.
Delegates will learn to conduct COSHH assessments in the workplace.
GWO Sea Survival provides the basic safety training required to safely carry out tasks in and on wind turbines.
Delegates will gain the knowledge and skills required to use possible aids, rescue equipment and methods.
GWO First Aid provides the skills to administer safe and effective first aid in and on wind turbines.
Delegates will be equipped to meet emergency response training requirements for the wind industry.
GWO Manual Handling provides the basic safety training requied to carry out manual handling tasks in a safe way.
The training encourages positive manual handling behaviour in the wind industry.
GWO Fire Awareness provides the basic knowledge to work safely in the wind industry.
Delegates will become familiar with Global Wind Organisation (GWO) emergency response requirements both onshore and offshore.
GWO Working at Height provides the skills and knowledge to work in a safe manner in the wind industry.
Delegates will meet emergency response training requirements for personnel new to the industry.
GWO Working at Height Refresher With Manual Handling provides a balance of the knowledge and skills necessary to renew a GWO Working at Height and GWO Manual Handling certification.
Delegates are required to complete refresher training within two years of the initiall courses to remain certified.
GWO First Aid Refresher renews the skills required to administer safe and effective first aid on offshore wind installations.
Delegates are required to complete the refresher training within two years of the initial GWO First Aid course to remain certified.
CISRS Advanced Scaffold Inspection is aimed at Proffesional Scaffold Inspectors, Supervisors, Managers and anyone responsible for the inspection of complex tube and fitting scaffolds.
The course covers both basic and more complex scaffolding structures.
A GWO Basic Technical Training (BTT) combined course includes GWO Basic Technical Electrical, Hydraulics and Mechanical Training.
Delegates will learn to perform basic tasks under the supervision of an experienced technician.
ITC Emergency First Aid at Work Including Electric Shock is suitable for personnel who require a first aid certificate with emphasis on the requirements for those working around electricity.
Fit To Train relates to the risk of using Compressed Air Emergency Breathing Systems (CA-EBS) and is designed to ensure you are physically fit to use these systems.
If you wish to complete a BOSIET, FOET or HUET, you must have a Fit To Train certificate.
GWO BTT Merit Gap Training replaces current manufacturer certificates in Basic Technical Training.
The course intends to fill the gap in knowledge between these existing certificates and GWO's Basical Technical Training.
Provision and Use of Work Equipment Regulations (PUWER) ensures companies who own, operate or have control over work equipment must manage the risks from that equipment.
Delegates will gain the knowledge and skills to ensure their organisation meets PUWER standards.
ECITB Manual Handling provides an understanding of the risks and practical issues involved in manual handling.
Delegates will learn to carry out manual handling tasks in a safe way.
The City and Guilds 18th Edition IET Wiring Regulations training course familiarises electrical professionals with the changes to the BS 7671:2018 standard.
All electrical professionals must ensure they are familiar with the changes to the standard which came into force in January 2019.
This City and Guilds 18th Edition IET Wiring Regulations Refresher training course familiarises electrical professionals with the changes to BS 7671:2018.
This one day refresher course is only for those who have passed the most recent amendment of the 17th edition (since 2015).
The Scaffolding NVQ Level 3 Portfolio Build allows delegates to achieve a Level 3 NVQ Diploma in Accessing Operations and Rigging - Scaffolding.
The training has been developed for delivery in a working environment and delegates must therefore be employed to study this qualification.
UK Offshore Legislation training provides basic understanding and awareness of legislation applying to the offshore industry.
PLEASE NOTE: This training is delivered in Aberdeen.
UK Offshore Legislation Refresher training updates and reinforces essential health and safety requirements in the offshore industry.
AIS Survivex have developed a course for fabric maintenance personnel required to use the Humidur range of products.
PLEASE NOTE: This training is delivered at our Aberdeen location.
Transportation of Dangerous Goods by Air (CAA) training provides the skills and knowledge required to correctly prepare shipments of dangerous goods for transport by air.
This course complies with the requirements of the International Civial Aviation Authority's (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air.
OPITO Offshore Installation Manager (OIM) Controlling Emergencies Competence Assessment tests competency against the OPITO standard.
OPITO Control Room Operator (CRO) Emergency Response Competence Assessment and Coaching introduces developing CROs to emergency response elements of the role.
PLEASE NOTE: This training is delivered at our sister company Survivex's location.
OPITO Major Emergency Management Initial Response (MEMIR) training focuses on current major emergency management practices and techniques.
GWO Enhanced First Aid (EFA) provides the skills to use advanced emergency equipment to save a life in a remote environment.
Delegates will learn to administer safe, effective, and immediate lifesaving and enhanced first aid measures.
A Norwegian Escape Chutes is an evacuation system which is in place on some offshore installations.
Delegates will gain an understanding of the Norwegian Escape Chute system and practice using it as a tertiary means of escape.
Every offshore worker must pass an OGUK offshore medical examination which classifies them as medically fit to work in the offshore environment.
Anyone using Compressed Air - Emergency Breathing Systems (CA-EBS) also requires a Fit To Train certificate.
TICA-P 01 Abrasive Blast Cleaning (Direct Pressure) is a Sprayer Blaster Painter ECITB Technical Test.
Delegates working on both onshore and offshore fabric maintenance can complete this as a "trade test" before their employment is started or approved.
TICA-A02 Industrial Coatings Brush Application is a Sprayer Blaster Painter ECITB Technical Test.
TICA-A01 Industrial Coatings Airless Spray Application is a Sprayer Blaster Painter ECITB Technical Test.
ECITB Technical Test - TTI01 Thermal Insulation is a ECITB Technical Test.
This test is aimed at both onshore and offshore personnel involved in Fabric Maintenance who may be required to complete a "trade test" before their employment is started or approved.
GWO Enhanced First Aid Refresher (EFAR) maintains the skills to use advanced emergency equipment to save a life in a remote environment.
Delegates are required to complete the refresher training within two years of the initial GWO Enhanced First Aid (EFA) course to remain certified.
OPITO Helideck Operations Initial Training (HOIT) is for personnel appointed to the role of helicopter landing officer (HLO) and/or offshore helideck assistant (HDA).
This training includes a FREE Transportation of Dangerous Goods by Air Awareness e-Learning course.
Working in High Risk Confined Spaces is a City and Guilds training programme that provides delegates with hands-on experience of complex confined space entry procedures.
The training focuses on environments where the use of compressed air and full working set breathing apparatus is required.
GWO Advanced Rescue Training (ART) combined provides the skills to safely access and rescue a casualty from the hub, spinner, inside blade, nacelle, tower and basement section of a wind turbine generator.
Delegates will learn to use industry standard recue equipment and techniques that exceed those of GWO Working at Height.
CISRS has introduced a scaffolding awareness training standard for non-scaffolding personnel.
Delegates will gain the knowledge to identify the core components of a safe scaffold and appreciate the potential dangers of working at height on scaffolding.
This City and Guilds assured SIRP Awareness course provides theoretical and practical knowledge of SIRP and the importance of human factors in the process.
Appointed Person Moving Loads is stage one of the four stage ECITB process which validates the competence of an individual to be an Appointed Person responsible for moving loads operations.
Delegates will gain the necessary skills and knowledge to oversee, plan or manage lifts or moving loads operations.
ECITB Technical Test - TAP01 Plan a Rigging Operation is stage three/four of the four stage ECITB process validating the competence of an individual to be an appointed person responsible for moving loads operations.
A delegate's ability to fulfil the role of an appointed person will be assessed through theoretical and practical tests.
Working in Low Risk Confined Spaces is a City and Guilds training programme that provides delegates with hands-on experience of using fall arrest equipment and ladder climbing techniques to enter confined spaces.
The training focuses on environments with no likely risk of flooding and adequate ventilation.
Working in Medium Risk Confined Spaces is a City and Guilds training programme that provides delegates with hands-on experience of two methods of entering a confined space.
The training focuses on environments with a realistic possibility of encountering a specified risk during the work activity.
Train The Painter - Gold is a combined course including the Abrasive Blast Cleaner, Protective Coatings Applicator and Sprayer Painter modules of SSPC Train the Painter.
The Train the Painter applicator training programme has been developed by industry experts who are passionate about training in the protective coatings industry.
GWO Advanced Rescue Training (ART) Refresher reviews and builds on knowledge and skills previously gained from GWO ART and GWO Working at Height training.
The course includes the Hub, Spinner and Inside Blade Rescue (HSIBR) module and the Nacelle, Tower and Basement Rescue - Refresher (NTBR-R) module which includes GWO Working at Height.
GWO Slinger Signaller has been developed to ensures safe lifting during manufacturing, installation and maintenance of wind turbines and their components.
Delegates will be equipped with the required knowledge and skills to conduct assigned slinger signaller tasks safely and efficiently.
Confined Space Entry Awareness with Breathing Apparatus provides knowledge of the safety practices and equipment utilised when working in confined spaces.
Delegates will learn to safely enter and work within higher risk confined space environments where breathing apparatus may be required.
The RigEx Rigging and Lifting Handbook is a pocket-sized book designed to support rigging and lifting personnel.
The handbook covers rigging responsibilities, rules and hazards as well as planning and rigging loads.
GWO Working at Height and GWO Manual Handling can now be combined into a 2 day course as part of the GWO Basic Safety Training standard.
Confined Space Rescue and and Recovery of a Casualty provides the skills to work as part of a dedicated recovery team in a confined space environment.
Delegates will learn to rescue casualties in an emergency situation.
OPITO Helideck Emergency Response Team Leader (HERTL) Further training is required to revalidate an initial OPITO HERTL certificate.
PLEASE NOTE: This course is delivered at Offshore Training Newcastle (OTN) at Newcastle International Airport Training Academy.
The course dates listed are for the practical training only. Upon booking you will be enrolled onto the theory element online to complete at home prior to attending the practical training at our site.
Train The Painter - Protective Coatings Applicator is a mandatory course for delegates completing the SSPC Train The Painter programme.
This digital version of the course uses a blended learning approach by combining e-learning at home with practical training in the centre.
The course dates listed are for the practical elements only. Upon booking you will be enrolled onto the theory element online to complete at home prior to attending the practical training at our site.
Train The Painter - Abrasive Blast Cleaner is a module of the SSPC Train The Painter programme.
Train The Painter - Sprayer Painter is a module of SSPC Train The Painter.
A Qualitative Face Fit Test uses an individual's sense of taste to confirm their respiratory protective equipment (RPE) fits and provides effective protection.
AIS Training can perform a Qualitative Face Fit Test for a variety of masks.
A Quantitative Face Fit Test uses particle counting to test the quality of the seal on respiratory protective equipment (RPE) to ensure it fits and provides effective protection.
AIS Training can perform a Quantitative Face Fit Test for a variety of masks.
Renew all your GWO certificates with a GWO Basic Safety Training Refresher Package.
AIS Survivex have created a discounted course package of five GWO courses that keep your mandatory GWO certifications up to date.
TWAHR01 – Working at Height Basic Rescue Techniques is an ECITB Technical Test.
This test is aimed at both onshore and offshore personnel who may be required to complete a "trade test" before their employment is started or approved.
TWAH01 – Working at Height is a ECITB Technical Test.
ITC Introduction to Mental Health and Wellbeing Awareness develops knowledge of mental health issues and how to assist someone who may be experiencing them.
ITC Mental Health and Wellbeing Awareness provides knowledge of a wide range of mental health issues and how to assist someone who may be experiencing them.
The Site management safety training scheme (SMSTS-R) is a two-day refresher course designed for site managers, or aspiring site managers who need to refresh their certificate. It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.
This refresher training course is designed to bring your health and safety knowledge up to date, as well as giving you a thorough overview of the legislative changes and their impact in the workplace. It builds on the material in the original course.
The Site management safety training scheme (SMSTS) is a five-day course designed for site managers, or aspiring site managers. It is designed for those with responsibility for managing, monitoring,implementing and reporting in a construction environment.
The site supervision safety training scheme (SSSTS) is a two-day course designed for site supervisors, or aspiring site supervisors.
CPCS Crane Supervisors A62 is aimed at supervisors and slinger signallers who are required to supervise lifting operations within their job role.
This couirse will equip delegates with the knowledge on how to safely supervise a lifting operation to ensure compliance with the law and ensure the health and safety of all employees and others involved.
CPCS A40b Slinger Signaller (static duties) training will provide candidates with a thorough practical and theory training in operating as a slinger signaller.
Content covered will equip delegates to pass the CPCS theory and practical tests.
CPCS Appointed Persons: Lifting Operations A61 is for supervisors and managers with responsibility for lifting operations.
CITB Health and Safety Awareness is designed to help those who are about to or have just began their career working in the industry to understand the potential hazards they face on-site.
This course is an ideal foundation for those wishing to obtain an industry accreditation card.
TML03 Moving Loads - Interpret and carry out a lift plan with obstructions is a ECITB Technical Test.
This test is aimed at both onshore and offshore personnel involved in lifting operations who may be required to complete a "trade test" before their employment is started or approved.
Technical Tests are the most flexible, economical and ‘instant’ way to assess and validate the ability of individual employees or prospective recruits to perform the skill-based tasks that the industry needs. A Technical Test ensures a Craftsperson or Technician has the skill, ability and job knowledge relevant to the work they are required to carry out. Each Technical Test examines a very specific aspect of an engineering construction discipline.
The objective of this technical test is to ensure that a candidate has the knowledge, skills and ability to safely and accurately inspect, test and maintain industrial circuit protective equipment using appropriate materials, equipment, tools and techniques.
For: Transient Workers – Electrical Maintenance
The objective of this technical test is to ensure that a candidate has the knowledge, skills and ability to safely and accurately carry out a visual, close, and detailed inspection of electrical and instrumentation equipment in a defined hazardous area, recording results, and recommending appropriate remedial action using appropriate materials, equipment, tools and techniques.
The objective of this technical test is to ensure that a candidate has the knowledge, skills and ability to safely and accurately check the condition of battery cells, take voltage readings making comparison to the manufacturers recommendations and check the functionality of battery-supported UPS (Uninterrupted power supply) equipment using appropriate materials, equipment, tools and techniques.
TIE04 Install Electrical Distribution Final Circuits is a ECITB Technical Test.
This test is aimed at both onshore and offshore personnel involved in Electrical Installation who may be required to complete a "trade test" before their employment is started or approved.
TIE08 Installing AC Electrical Motors is a ECITB Technical Test.
TIE15 Installing Support Systems is a ECITB Technical Test.
TIE16 Installing Cables in an Intrinsically Safe System is a ECITB Technical Test.
TIE 17 Install, Gland and Terminate Power Cables is a ECITB Technical Test.
ECITB Technical Test – TPF05 Hot Work Preparation of Welded Pipework is a ECITB Technical Test.
This test is aimed at both onshore and offshore personnel involved in pipefitting who may be required to complete a "trade test" before their employment is started or approved.
ECITB Technical Test – TPF08 Fabricating and Installing Pipework Supports is a ECITB Technical Test.
ECITB Technical Test - TPF10 Hydrostatic Pressure Testing of Pipework Systems is a ECITB Technical Test.
TPF11 Interpret Drawing Information and Assemble Threaded Pipework is a ECITB Technical Test.
TPL01 - Marking Out Plate and Structural Steelwork from Drawings is a ECITB Technical Test.
This test is aimed at both onshore and offshore personnel involved in Plating who may be required to complete a "trade test" before their employment is started or approved.
TPL03 - Setting out Platework and Rolled Steel Section From Drawings is a ECITB Technical Test.
TPL08 Hot Work Fabrication and Inspection of Steelwork is a ECITB Technical Test.
TSCF02 Basic Scaffolder is a ECITB Technical Test.
This test is aimed at both onshore and offshore personnel involved in scaffolding who may be required to complete a "trade test" before their employment is started or approved.
TSCF03 Advanced Scaffolder is a ECITB Technical Test.
TEM14 Periodic inspection of a 3-phase system is a ECITB Technical Test.
This test is aimed at both onshore and offshore personnel involved in Electrical Maintenance who may be required to complete a "trade test" before their employment is started or approved.
ECITB Technical SBT Tests with an associated ECITB certificate of acheivement play a key role in validating candidate skills.
RenewableUK (RUK) Wind Turbine Medicals are recommended for personnel in the wind and renewable energy industry.
The medical examination confirms medical fitness to work on offshore and onshore renewable energy projects.
Drug testing can be used for a variety of reasons. Drug tests require the supply of a urine sample on the day and the sample can be tested immediately for results. Results can be provided directly to the donor, or can be provided in confidence to an approved company contact.
The training covers management of wellbore pressures, maintaining primary well control, prevention and detection of a kick, management of a kick, equipment used, and secondary well control.
Level 3 IWCF Drilling Well Control training consists of two written assessments and a practical assessment using simulator equipment. The practical assessment is usually conducted in pairs of a driller level candidate (level 3) and a supervisor level candidate level 4
Drilling Well Control training has been developed by the International Well Control Forum (IWCF) for personnel in critical well control roles on offshore drilling installations or onshore. Level 4 IWCF Drilling Well Control training consists of two written assessments and a practical assessment using simulator equipment. The practical assessment is usually conducted in pairs of a supervisor level candidate (level 4) and a driller level candidate (level 3).
The GWO Control of Hazardous Energies (CoHE) standard has been developed in response to the demand for recognisable Control of Hazardous Energies Training in the wind industry.
The GWO Control of Hazardous Energies (CoHE) standard has been developed in response to the demand for recognisable Control of Hazardous Energies Training in the wind industry
ECITB Technical Mechanical Joint Integrity (TMJI) training is stage 3 in the ECITB/Step Change in Safety MJI model.
The training is for delegates who have completed the corresponding stage 1 modules (MJI10, MJI18 or MJI19) and stage 2 (workplace practice) and need to update their knowledge before taking stage 4 (ECITB Technical Tests).
The training embeds best practice in health and safety and environmental awareness and supports the HSE’s essential principles for good health and safety performance.
The ECITB SBT02 course is aimed at technicians that will be responsible for the installation and assembly of cone and threaded connection, that hold a current TSBT01 or have completed the SBT01 and are still within the 12 month validity period of certification. The course is designed as a progression from the SBT01.
It is a mandatory requirement that drivers undergo a medical examination to ensure they are medically fit to drive a heavy goods vehicle.
It is a mandatory requirement that all drivers must undergo and pass a taxi driver medical assessment before being granted their license to operate. The taxi driver medical assessment ensures taxi drivers are medically fit to safely drive a private hire vehicle or hackney carriage on public roads. This applies to new drivers and also drivers who wish to renew their taxi license.
This course will develop the knowledge of personnel who are qualified in HSE offshore first aid to a level where they have the necessary understanding and skills whilst assisting an offshore medic during emergencies.
3t offer Coded Welding training and a range of testing standards.
We are the ONLY training provider in the UK with a resident accredited engineer/surveyor here on-site allowing you to take your welding test whenever you are ready without pre-booking a time or day.
Basic Welding training is for those who required welding training but do not require a coded welding certificate.
ECITB Technical Mechanical Joint Integrity (TMJI) training is stage 3 in the ECITB/Step Change in Safety MJI model. This course includes all five modules.
The training is for delegates who have completed all stage 1 modules (MJI10, MJI18 and MJI19) and stage 2 (workplace practice) and need to update their knowledge before taking stage 4 (ECITB Technical Tests).
Offshore personnel may be nonimated by their company or sponsor to complete a fitness test for their job role.
The Chester Step Test is a tried and tested means of gauging fitness by measuring the ability to recover from exertion.
Offshore personnel may also be nonimated by their company or sponsor to complete a Chester Step Test for their job role.
The Scaffolding NVQ Level 2 Portfolio Build allows delegates to achieve a Level 2 NVQ Diploma in Accessing Operations and Rigging - Scaffolding.
ECITB SBT01 - Assemble and Install Small Bore Tubing with Twin Ferrule Mechanical Grip Fittings meets the ECITB training requirements for small bore tubing engineers and personnel.
ECITB Leading a Team Safely (LaTS) focuses on the essentials of being a leader.
Delegates will learn the health and safety responsibilities of supervisory staff when planning, implementing and reviewing.
Working at Height - Unit 7 Practical Management of Working at Height covers both Working at Height - Unit 2 PPE User and Working at Height - Unit 4 Management of Working at Height.
Delegates will learn to comply with working at height regulations in a management or supervisory role.
Working at Height - Unit 5 Portable Ladder Usage and Inspection provides the necessary skills and knowledge to safely use portable ladders and step ladders.
Manual Handling Assessor training provides the skills to conduct manual handling risk assessments in the workplace.
The classroom-based training can be completed using generic or company-specific documentation and systems.
Benzene Awareness training provides a basic awareness of benzene and the risks involved in working with the substance.
PLEASE NOTE: This training is delivered at our Aberdeen training centre.
GWO Basic Technical Training (BTT) Hydraulics provides the knowledge and skills to carry out basic hydraulic tasks on a wind installation.
Delegates will learn to use safe working procedures and correct personal protective equipment (PPE).
GWO Basic Technical Training (BTT) Electrical provides the knowledge and skills to carry out basic electrical tasks on a wind installation.
Delegates will learn to use working procedures and correct personal protective equipment.
GWO Basic Technical Training (BTT) Mechanical provides the knowledge and skills to carry out basic mechanical tasks on a wind installation.
Delegates will learn to use safe working procedures and personal protective equipment (PPE).
The CISRS Skills Test assesses the skills of trainee scaffolders who have completed CISRS Part 1 and 2 training courses.
This is now a mandatory requirement of the CISRS scheme, regardless of whether delegates have already achieved the NVQ.
The CISRS Scaffolding CPD Refresher course has been introduced to ensure the highest possible standard of scaffolding safety is being maintained throughout the industry.
Delegates who hold a CISRS card must complete the training before card renewal.
ECITB Leading The Individual focuses on the relationships within a team and the role of the leader.
Delegates will learn to use praise and recognition to improve performance.
ECITB Improving Job Site Effectiveness is part of the supervisor training programmes which have been developed by ECITB.
Delegates will learn how to manage continous improvement of a job site by measuring its effectiveness.
ECITB Becoming an Effective Communicator is part of the supervisor training programmes which have been developed by ECITB.
Delegates will learn key communication and management skills required in a supervisory role.
AIS Survivex are an ECITB approved test centre.
Delegates can complete a range of ECITB Knowledge Tests in subject areas that include electrical installation, electrical maintenance, mechanical maintenance, pipefitting, rigging and plating.
The CISRS Advanced Skills Test is designed to assess scaffolding knowledge and expertise.
Throughout the 2 day course delegates will demonstrate scaffolding abilities through practical skills assessments.
Successful completion of CISRS Advanced Level 3 Scaffolding training will result in a CISRS Advanced Scaffolding certificate.
Delegates will learn to safely erect, alter and dismantle complex scaffolding structures while working as part of a team.
OPITO Helideck Emergency Response Team Leader (HERTL) training is for current HERTLs or those who wish to progress into the role.
AIS Survivex have developed an introductory rigger training course that provides delegates with the knowledge and skills to safely carry out basic rigging and lifting operations.
Fire Warden training enables personnel with enhanced safety roles to meet the training requirements for fire safety in the workplace.
Delegates will gain a necessary understanding of fire and fire procedures detailed in current legislation.
OPITO Helideck Emergency Response Team Member (HERTM) Further training is required to revalidate an initial OPITO HERTM certificate.
ITC First Aid At Work Level 3 (RQF) Refresher updates and refreshers knowledge of the first aid at work syllabus, while allowing time for revision and practice sessions in preparation for a practical assessment.
The CompEx Foundation course provides knowledge and understanding of the terminology and protection concepts used in a potentially flammable atmosphere.
For full participation, delegates are required to have no prior knowledge of flammable or potentially explosive atmospheres.
Fireproofing is designed to protect the structural steelwork of an oil and gas installation in the event of an explosion or fire.
If successfully completed, the OPITO Oil & Gas Industry Fireproofing Competence Assessment (Level 2) allows delegates to become OPITO-certified in fireproofing.
Competent insulation practitioners fit insulation systems to pipework, equipment and structures, and have an understanding of appropriate thermal, acoustic, cryogenic, personal protection and passive fireproofing insulation systems.
If successfully completed, the OPITO Application of Insulation Systems Competence Assessment (Level 2) allows delegates to become an OPITO-certified insulation practitioner.
The CISRS Part 1 Scaffolding Tube and Fitting training course reinforces the core skills of scaffolding, including how to safety erect, alter and dismantle strucutres.
Delegates will gain an improved knowledge of using tube and fitting or system scaffolding.
This 1 day CISRS COTS course introduces new scaffolders to the industry, and allows CISRS card holders to renew their card once it expires.
Delegates will learn the basics of scaffolding and understand how to work safely with scaffolding and access equipment.
IPAF Mobile Elevated Work Platform (MEWP) training is beneficial in all workplace sectors.
Delegates will learn how to correctly operate common pieces of equipment that are used within the workplace in a wide variety of industries.
Advanced Hub Rescue provides the specialist skills and knowledge to rescue personnel incapacitated in various sections of a turbine including the hub.
Delegates will learn to react in a safe, effective and prompt manner to stabilise a casualty.
The main aim of this combined course is to give Helideck and Emergency Response Team Members the opportunity to practice and maintain the skills required when dealing with emergency response situations, incidents and live fire exercises, which they would not be able to conduct in the workplace.
This half-day course addresses the interpretation and application of the Electricity at Work Regulations 1989. It is intended for those who work directly with electricity, this course would also be appropriate for those who have responsibility for the health and safety of their employees, such as Project Managers or lead Supervisors.
OPITO Helicopter Underwater Escape Training (HUET) with CA-EBS prepares delegates to travel to and from offshore oil and gas installations and vessels by helicopter.
This course includes the use of a Compressed Air Emergency Breathing System (CA-EBS), which is the North Sea HUET requirement.
Working at Height - Unit 4 Managers and Supervisors demonstrates a selection of working at height techniques.
Delegates will gain a comprehensive understanding of site managers and supervisors responsibilities under the Health and Safety at Work Act 1974 and its supporting regulations.
This is the course for booking delegates onto their Weld Test.
Do not send Joiners and
Do not make this visible
This training programme has been designed for novices with little or no previous FLT driving experience (or for those with no formal FLT qualification). Please note that course durations will vary depending on how many are booked onto the course.
PLEASE NOTE: Unfortunately we cannot currently offer this course to self-funder delegates.
ECITB Mechanical Joint Integrity MJI10: Hand Torque Bolted Connection Techniques concentrates on the skilled performance required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque.
This technically detailed course is delivered to the latest ECITB standards.
ECITB Mechanical Joint Integrity MJI18: Hydraulic Tension Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening bolted connections using hydraulic tensioning equipment.
The technically detailed course is delivered to the latest ECITB standards.
ECITB Mechanical Joint Integrity MJI19: Hydraulic Torque Bolted Connection Techniques specifies the skilled performance expected when dismantling, inspecting, preparing, assembling and tightening flanged and clamp connector pipe joints using hydraulic torque equipment.
This ECITB Mechanical Joint Integrity course is a combination of MJI10 and MJI19 which are stage one of the four stage ECITB MJI training standards validating skills in the specialist critial bolting area.
Delegates will gain the skills required to dismantle, inspect, prepare, assemble and tighten flanged and clamp connector pipe joints using hand torque and hydraulic torque equipment.
OPITO combined Basic Offshore Safety Induction and Emergency Training (BOSIET) training provides an understanding and awareness of the hazards encountered when working on offshore installations. It is often referred to as 'offshore survival training'.
This course includes Compressed Air Emergency Breathing System (CA-EBS) and Emergency Breathing System (EBS), sometimes referred to as a rebreather. This is considered the international BOSIET requirement.
OPITO combined FOET includes the OPITO Further Offshore Emergency Training (FOET) with Emergency Breathing System (EBS) and Compressed Air Emergency Breathing System (CA-EBS). This is considered the international FOET requirement. It is often refrerred to as an 'offshore survival refresher'.
Delegates will have the opportunity to practice and demonstrate emergency response skills which are not possible to practice during offshore drills, exercises and emergency training.
The OPITO combined Helicopter Underwater Escape Training (HUET) prepares delegates to travel to and from offshore oil and gas installations and vessels by helicopter.
This course includes Compressed Air Emergency Breathing System (CA-EBS) and Emergency Breathing System (EBS), sometimes referred to as rebreather.
The Train the Painter programme has been developed by industry experts who are passionate about training in the protective coatings industry.
Train The Painter - Abrasive Blast Cleaner is a module of SSPC Train The Painter.
AIS Training have developed Rigging Loft Management and Lifting Equipment Inspection training which combines the inspection of a variety of lifting equipment with the methods used to manage and control the equipment throughout a variety of operations.
CISRS Basic Scaffold Inspection is aimed at scaffolders responsible for inspecting and checking basic scaffolds.
Delegates will develop an understanding of scaffolding components, forms and construction and inspection procedures of basic access scaffolds.
The CISRS Part 2 Scaffolding Tube and Fitting training course is open to people who have spent a minimum of 6 months on-site since passing the CISRS Part 1.
Delegates will work as part of a team to safely erect, alter and dismantle scaffolding structures.
OPITO Helideck Emergency Response Team Member (HERTM) training prepares offshore emergency response teams for helideck and helicopter emergencies.
OPITO Offshore Emergency Response Team Leader (OERTL) training is for current OERTLs or those who wish to progress into the role.
PLEASE NOTE: This course is delivered at Offshore Training Newcastle (OTN) at Newcastle International Airport Training Academy or Vital Fire Solutions at County Durham and Darlington Fire and Rescue Service Training Centre.
This combined OPITO course includes Helideck Emergency Response Team Member (HERTM) and Offshore Emergency Response Team Member (OERTM) training.
OPITO Compressed Air Emergency Breathing System (CA-EBS) Initial Deployment Training is now a mandatory requirement for offshore workers.
Delegates will learn the particular hazards and properties of a CA-EBS.
OPITO Offshore Emergency Response Team Leader (OERTL) Further training is required to revalidate an initial OPITO OERTL certificate.
The Working at Height - Unit 2 PPE User training course is an exciting programme for those who work above ground at any level.
ITC Emergency First Aid at Work Level 3 (RQF) may be more suitable for lower-risk work environments such as offices and/or organsations with fewer than 100 employees.
S-Cape is an evacuation system which is in place on some offshore installations.
Delegates will be provided with the skills and knowledge to use the S-Cape system.
All personnel who travel by helicopter to an offshore installation are required to have their shoulders formally measured by a specially trained person.
Anyone who hasn’t had their shoulder width measured will be classified automatically as Extra Broad (XBR). This restricts the seats you’re permitted to sit in and therefore can mean that you won’t be allowed on certain flights.
IOSH Working Safely is a one day course for personnel at any level, in any sector.
Delegates will gain an understanding of health and safety and how to make a real difference to the wellbeing of themselves and others through changing behaviour.
CompEx Electrical Refresher training must be completed within 5 years of the original CompEx Electrical course to remain qualified.
The course can also be attended to provide an overview of explosive atmosphere installation and inspection.
AIS Survivex have developed lifting and hoisting training that is specific to wind turbines for personnel working in the wind industry or related fields.
Surface Preparation - Bristle Blaster training provides the knowledge and skills to operate bristle blaster tools.
This course is designed to exceed the requirements of paint, coating and composite manufacturers.
Rollgliss R350 Working at Height and Rescue provides delegates with the skills and knowledge to work and perform rescues using the Rollgliss R350 rope system.
HSE Offshore First Aid Refresher updates the knowledge and skills covered in the initial HSE Offshore First Aid training course.
The Working at Height - Unit 1 Height Safety and Harness Awareness training course is designed to introduce candidates who are not actively involved in working at height to the requirements of regulations.
The Working at Height - Unit 3 Use of Rescue Equipment training course is an exciting programme for those whose role involves performing rescues at height.
The Working at Height - Unit 6 PPE (Personal Protective Equipment) Inspection training course is an exciting programme catered towards candidates who are actively involved in the control of working at height equipment.
ITC Advanced First Aid and Incident Management is a comprehensive first aid training programme for those working in remote or offshore environments.
The course includes key lifesavings skills and reponse to common emergencies and minor medical complaints.
OPITO Oil & Gas Industry Fireproofing Training (Level 1) provides delegates with an understanding and awareness of the tasks and hazards found in fireproofing operations on oil and gas installations.
The ECITB Low Risk Confined Space course covers low risk shallow entries no deeper than three metres.
Delegates will learn to use equipment which allows safe access and egress into confined space environments.
The ECITB Medium Risk Confined Space course covers low risk shallow entries deeper than three metres.
Delegate will learn two methods of entry; staying on and removal from the lifeline.
The ECITB High Risk Confined Space course covers primarily enclosed and potentially hazardous working environments.
Delegates will learn to identify risks and implement suitable and sufficient control measures when gaining entry to high risk confined spaces.
ECITB Working at Height is an exciting training programme for those whose role involves working above ground level.
Delegates will gain practical skills and knowledge of working at height in a variety of environments.
ITC Level 2 Award in Basic Life Support and Safe Use of an Automated External Defibrillator is designed to provivde an awareness of basic lifesaving skills.
Lifting Operations and Lifting Equipment Regulations (LOLER) provide guidance on offshore lifting operations.
LOLER Awareness training provides an introduction to safe lifting requirements.
The NEBOSH National General Certificate in Occupational Health and Safety is the most popular and recognised health and safety qualification of its kind.
Delegates will learn to identify, evaluate and control a wide range of workplace hazards.
The NEBOSH International General Certificate in Occupational Safety and Health is widely respected throughout the world.
Delegates will gain an excellent introduction to occupational safety and health in all types of organisations and industries.
Abrasive wheels are often fitten in grinding machines for various grinding and cutting operations.
Abrasive Wheels training provides an understanding of safe working practices when using abrasive wheels.
Electrical Safety Awareness training can be customised to suit specific delegate requirements and the type of activities carried out by the delegate in their workplace.
Manual Handling training provides an understanding of the risks and practical issues involved with manual handling.
Personnel who may come across asbestos or asbestos-containing materials must be appropriately trained to work safely and avoid disturbing or damaging the hazardous substance.
This Asbestos Awareness course provides an introduction to the potential damage to health which can be caused by coming into contact with asbestos.
This popular Boat Transfer training provides delegates with theoretical knowledge and practical experience of transferring between vessels offshore.
The course focuses on safe transfer between a turbine transfer vessel and a wind turbine.
The ECITB CCNSG Safety Passport training programme is a common prerequisite for anyone working on construction or engineering sites.
Delegates will gain an understanding of all aspects of working safely.
CompEx is a globally recognised scheme for electricians working in explosive atmospheres.
The course includes competency based training and assessments for electrical and instrumentation technicians working in hazardous areas of industrial environments.
This ECITB Mechanical Joint Integrity course is a combination of MJI10, MJI18 & MJI19 which are stage one of the four stage ECITB MJI training standards validating skills in the specialist critial bolting area.
These training standards cover isolations, dismantling techniques, inspection of components, alignment techniques and clamp connectors as well as assembly and tightening techniques in specialist critical bolting.
OPITO Offshore Emergency Response Team Member (OERTM) Further training is required to revalidate an initial OPITO OERTM certificate.
ITC First Aid at Work Level 3 (RQF) training provides an introduction to first aid in the workplace.
IOSH Managing safely is a three day course for personnel responsible for the effective management of health and safety in the workplace.
Delegates will gain knowledge of key health and safety issues including environmental protection.
OPITO Offshore Emergency Response Team Member (OERTM) training prepares offshore emergency response teams to react safely and effectively in the unfortunate event of an offshore emergeny situation.
HSE approved Offshore First Aid training is a 4 day training course that provides knowledge and understanding of the role of a first aider on offshore installations.
Delegates will become qualified to act as a first aider in the workplace, under the terms of the Health and Safety (first aid) Regulations 1981.
Oil & Gas UK (OGUK) set a standard of fitness for those working offshore in the UK.
Application of insulation is designed to protect the environment, equipment and personnel, control noise, reduce energy costs and increase process efficiency.
OPITO Application of Insulation Systems Training (Level 1) provides delegates with the skills to understand and fit insulation systems to pipework, equipment and structures.
A banksman and slinger is responsible for ensuring safety during crane and slinging operations.
If successfully completed, the OPITO Banksman & Slinger Competence Assessment or Reassessment allows delegates to become an OPITO certified banksman.
OPITO Blaster-Sprayer training courses are widely recognised as the industry standard training for offshore blaster/sprayer operations.
OPITO Blaster-Sprayer Training (Level 1) can act as an introduction to newcomers or a useful refresher for experienced blaster/sprayers to test their knowledge.
A blaster sprayer uses compressors, blasting equipment and paint spraying devices to paint the surfaces of a structure.
If successfully completed, the OPITO Blaster-Sprayer Competence Assessment (Level 2) allows delegates to become an OPITO-certified industrial painter.
Hydrogen sulphide (H2S) gas is a key hazard which affects operations in the oil and gas industry.
OPITO Basic H2S Training provides relevant information and legislation on the characteristics, effects and detection of H2S gas.
OPITO Minimum Industry Safety Training (MIST) ensures employees working in the oil and gas industry have basic knowledge and understanding of the key safety elements of working offshore.
Many offshore oil and gas operators have now made this training mandatory for all new entrants to the oil and gas industry.
OPITO rigger training courses are widely recognised as the industry standard for offshore rigging and lifting operations.
If successfully completed, the OPITO Rigger Competence Assessments allow delegates to become an OPITO certified rigger.
Overhead Crane training provides an understanding of the relevant legislation that applies to lifting operations and lifting equipment and accessories.
Delegates will learn to safely and effectively operate overhead cranes.
AIS Survivex have developed risk assessment training that provides delegates with an understanding of producing lifting plans and risk assessments.
AIS Survivex have developed an introductory banksman slinger training course providing delegates with the knowledge and skills to safely carry out basic banksman and slinger operations.
The ECITB CCNSG Safety Passport Refresher training programme must be completed within 3 years of gaining a CCNSG Safety Passport Card to remain certified.
Delegates will refresh their understanding of all aspects of working safely.
Escape chutes are used as a means of escape, where fitted, from offshore oil and gas installations and vessels. The aim of this training programme is to give students an understanding of the Norwegian Sector escape chute system used in the industry and practice their use as a means of tertiary escape from offshore installations and vessels.
